Phison Ps225107ps2307 Mptool

The Phison MP Tool is powerful but unforgiving. If your drive is still under warranty, contact the manufacturer instead. For tech enthusiasts and repair shops, mastering MP Tool can resurrect “dead” USB 3.0 drives at the firmware level.

| Error | Meaning | Solution | |-------|---------|----------| | Flash ID mismatch | Wrong tool or firmware version | Find exact firmware for your NAND. | | Red X (Fail) – Read Only | Drive is write-protected | Enable “Preformat” + “Erase All” in settings. | | Blue (Not responding) | USB power issue or bad contact | Try rear USB port, short reset pins (hardware mod). | | Device not found | Driver conflict | Uninstall USB mass storage driver, reinstall with tool open. | | SATA device detected | Wrong mode | Force USB mode in BIOS or use older MP Tool version. |

For technicians fixing many drives, creating a standard INI for the PS2251-07 saves time.

Sample: PS2307_FIX.INI

[OPTION]
IC Type=PS2251-07
Burner File=BN07V113M.BIN
Firmware Name=FW07FF01V10810M.BIN
Test Item=Preformat
Preformat=2
Erase All=1
Low Level Format=1
[FUNCTION]
ENUM=1
WRITE PROTECT=0
FORMAT=1
FORMAT TYPE=32
FORMAT VOLUME LABEL=RECOVERED
[DEBUG]
VID=13FE
PID=5500
VENDOR_NAME=Phison
PRODUCT_NAME=USB 3.0 Flash Drive

Save this as USER_SETTING.INI and load it in MPALL.

If MP Tool fails mid-process and drive is unresponsive:

A. Extract MP Tool

B. Configure the Tool

Save configuration as default.ini.

C. Run MP Tool

D. Post-Format

Do not use random executables from unknown forums. Malware spreads easily via "cracked" MPTOOLs. Stick to reputable sources like USBDev.ru or FlashBoot.ru.