A frequent mistake: Users receive a serial number with their Magelis HMI purchase. That number is often a Runtime Reference Serial for the panel’s embedded copy, not for the PC software. Fix: Purchase a separate Development License (Part Number: VJDSNDV61).
Understanding how the reference serial number works in Vijeo Designer 6.1 is not merely an administrative task—it is the key to reliable HMI deployment. From initial software activation to matching the project with the physical Magelis panel, the serial number acts as the digital handshake between your development environment and the factory floor hardware.
If you are encountering persistent failures, methodically check: the correct type of serial (software vs. runtime), registry integrity, antivirus exceptions, and target firmware version. For long-term stability, consider documenting your offline activation responses and planning a migration to EcoStruxure Operator Terminal Expert.
Remember: In industrial automation, a serial number that "does not work" is rarely a mystery—it is always a logical mismatch waiting to be resolved.
Need further help?
Visit the Schneider Electric Exchange Forum (formerly SE Community) and search for "Vijeo Designer 6.1 license reference." Include your exact error code (e.g., LIC-0012 or RUN-045) for targeted assistance.
This article is intended for informational purposes. Always refer to the official Vijeo Designer 6.1 user manual (part number: 31006825 01) for legally binding procedures.
Vijeo Designer 6.1 requires a Reference Number and a Serial Number for full activation. These are typically found on your purchased software DVD case or in the license email sent by Schneider Electric. 🛠️ Activation & Setup
If you are setting up Vijeo Designer 6.1, use the following methods based on your needs:
Fully Licensed Mode: Enter your unique purchased Reference and Serial Numbers during the installation wizard.
Trial Mode: Use Reference Number VJDSNDTGSV62M and any 11-digit numeric serial (e.g., 01234567890) for a 21-day full-feature trial.
Limited Edition: Leave both fields blank to use the software permanently for only the HMISTO and HMISTU series. 🔍 How to Find Your Serial Number
If the software is already installed and you need to retrieve your credentials: Open the Schneider Electric folder in your Start Menu.
Launch the Registration Wizard (found under Vijeo-Frame for Buildtime or Vijeo-Runtime for Runtime). Select "Enter Received Authorization Code" and click Next. vijeo designer 61 reference serial number work
The Serial Number and Part Number (Reference Number) will be displayed on the screen. 💡 Pro Tips for 6.1
Version Conflicts: You cannot have Vijeo Designer 6.1 and 6.2 installed on the same computer simultaneously.
Registration: After installation, you must register the software via the Schneider Electric License Manager to receive a permanent Authorization Code.
Run as Admin: Always right-click and Run as Administrator when installing to ensure registry paths are correctly updated. If you're interested, I can: Help you upgrade to 6.2 or 6.3 Provide a list of compatible HMI hardware Explain how to register via web or email Let me know how you'd like to proceed with your setup. How to Register Vijeo Designer Runtime - Schneider Electric
To set up or register Vijeo Designer 6.1, you can use specific trial credentials or retrieve your existing license information using the built-in License Manager. Reference & Serial Numbers for Installation
If you are performing a fresh installation, you have three options depending on your license type:
Trial Mode: This provides full functionality for a limited period (typically 21 to 42 days).
Reference Number: VJDSNDTGSV62M (Note: Reference numbers for v6.2 often work for v6.1 trial setups).
Serial Number: Use any 11 numeric digits (e.g., 01234567890).
Limited Edition Mode: This mode allows full configuration but only permits downloading to HMISTO and HMISTU series hardware.
Instructions: Leave both the Reference and Serial Number fields blank when prompted by the installer.
Fully Licensed Mode: This requires the official credentials provided with your physical DVD or sent via email upon purchase. How to Find Your Current Serial Number A frequent mistake: Users receive a serial number
If the software is already installed and you need to retrieve your specific serial number:
Open the Start Menu and navigate to the Schneider Electric folder. Launch the Vijeo Designer Runtime License Manager. Select "Enter received Authorization code" and click OK.
The next dialog window will display the Serial Number used during the initial registration. Registration & Activation
To move from a trial to a permanent license, you must generate an Authorization Code:
Run the RegistrationWizard.exe located in the Vijeo-Frame\Registration folder of your installation directory.
Collect your Serial Number, Part Number, Code Entry Number, and Computer ID from the wizard.
Contact your local Schneider Electric Support with these details to receive your permanent activation code.
Important Note: Vijeo Designer 6.1 is considered a legacy version. Schneider Electric strongly recommends upgrading to Vijeo Designer 6.2 or later for better compatibility with modern Windows operating systems.
Vijeo Designer 6.1 in a fully licensed mode, you must provide a valid Reference Number Serial Number
during the installation process or via the license management tools provided by Schneider Electric Licensing & Installation Modes
When prompted by the installation wizard, you can choose how to proceed based on the information you enter: Fully Licensed Mode
: Enter the unique Reference and Serial numbers provided on your purchased DVD case or within your official license email. Trial Mode : This allows full functionality for (or up to 42 days in newer versions). Reference Number VJDSNDTGSV62M Need further help
(Note: While this is a common V6.2 trial code, it is often used for earlier versions in this series). Serial Number : Enter any 11 numeric digits 01234567890 Limited Edition Mode : Leave both the Reference and Serial fields
. This mode has no time limit but restricts downloading to only the HMISTO and HMISTU series. Schneider Electric How to Find Your Serial Number
If the software is already installed and you need to retrieve your registration details: Vijeo Designer Runtime License Manager
from the Windows Start menu (located under the Schneider Electric folder). "Enter received Authorization code"
Confirm any following dialogs; the next window will display the Serial Number Part Number , and your unique Computer ID Schneider Electric Activation Process
For full permanent activation beyond the initial installation: Launch the Registration Wizard : Found in the Schneider Electric folder or at
C:\Program Files (x86)\Schneider Electric\Vijeo-Designer 6.1\Vijeo-Frame\Registration\RegistrationWizard.exe Gather System Info
: Note your Serial Number, Part Number, and Computer ID from the wizard. Request Authorization : Contact your local Schneider Electric Support Center with these details to receive your permanent Authorization Code Complete Activation : Enter the received code into the wizard and click Schneider Electric direct contact information
for a specific regional Schneider Electric support center to request an authorization code? How to Register Vijeo Designer Runtime - Schneider Electric
Vijeo Designer 6.1 is an HMI (Human–Machine Interface) engineering software from Schneider Electric used to design operator interfaces for industrial automation systems. This essay explains the role of reference and serial numbers in Vijeo Designer 6.1, how licensing and activation work, and practical implications for installation, maintenance, and troubleshooting.
The license algorithm checks system time. If your PC clock is set incorrectly (e.g., backdated to bypass trial), the reference serial number will be rejected. Fix: Sync with Windows Time Server before activating.
The version 6.1 of Vijeo Designer likely brings enhanced features and improvements over its predecessors, including better performance, more intuitive design tools, and support for newer hardware.