Magnet Office Crack (Full Version)

Repairing is fine, but stopping the issue at its source saves thousands in maintenance. Implement these four strategies.

Many offices apply magnetic paint directly over standard drywall. However, most magnetic paints are brittle when dry. As the paint cures, it shrinks slightly. Add a strong magnet’s pull, and the paint lacks the tensile strength to resist cracking. The crack often follows the grain of the magnetic particles (iron filings) embedded in the paint. magnet office crack

Mix your joint compound to a creamy consistency (like peanut butter). Using the 4-inch knife, force compound deep into the V-groove. Immediately apply a strip of Fibafuse or mesh tape over the wet compound, then skim a thin layer over the tape, feathering the edges 2 inches beyond the crack. Let dry for 24 hours. Repairing is fine, but stopping the issue at

Never use one large magnet. Use two smaller magnets spaced 4 inches apart. This splits the stress and prevents a single magnet office crack from racing across the board. Warning: A Level 3 magnet office crack on

Not all cracks are emergencies. Use this three-tier system to assess your magnet office crack.

Warning: A Level 3 magnet office crack on a glass board can shatter without warning. If you see a star-shaped impact point, remove all magnets immediately and tape over the crack.