Usb Download Cable Gev189 Driver Windows 10 New -

Windows 10 will try to "fix" your driver again. Stop it:

If you’ve just unboxed a fresh Windows 10 laptop and tried to connect your USB Download Cable (Model GEV189) to program a Baofeng, Kenwood, or Wouxun radio, you’ve likely encountered a frustrating digital brick wall.

You plug it in. Windows makes the familiar ding-dong. You open your CHIRP software. Nothing. Or worse—an error that reads: "USB Device not recognized."

Welcome to the club. You’ve just met the Prolific PL2303 vs. Windows 10 showdown.

Before installing the new (old) driver, you must remove Microsoft’s forced update.

Windows 10 loves to reinstall wrong drivers automatically.

Before diving into the driver installation, let’s clarify what this cable actually is. The GEV189 is a USB-to-TTL serial adapter. One end has a standard USB-A male connector (plug into your PC). The other end usually has 4 female Dupont wires or a proprietary connector with pins for:

Inside the molded USB plug housing is a small chip—typically the Prolific PL-2303HX or PL-2303TA. Unfortunately, official drivers from Prolific after 2012 deliberately block counterfeit or older chips. Since many GEV189 cables use older or cloned chips, the latest official drivers will reject them on Windows 10.

The GEV189 on Windows 10 isn't impossible—it’s just a rite of passage. Use the vintage driver trick, block Windows updates for that specific device, or simply spend $15 more to join the FTDI/CH340 future.

And remember: If a driver site asks you to turn off your antivirus, run away. Your radio can wait.

---

Need the safe driver link? Search for "Prolific PL2303 3.3.2.105 GitHub" — the open-source community keeps a verified copy free of malware.

For the Leica GEV189 USB download cable on Windows 10, you can use the USB Cable Drivers v1.70 (GEV189/GEV195/GEV218) package, which supports current Windows operating systems. Where to Download

You can find the official or compatible drivers from authorized survey equipment retailers and support sites:

Sunbelt Sales provides the v1.70 ZIP file (3 MB) specifically for Go to product viewer dialog for this item. usb download cable gev189 driver windows 10 new

G2 Survey offers direct links to data transfer cable drivers, including GEV189 packages for newer Windows versions.

Leica myWorld is the official customer portal for the latest firmware and driver updates directly from the manufacturer. Installation Steps

If Windows 10 does not automatically recognize the cable, follow these steps to install the driver manually:

Download and Extract: Get the ZIP file from one of the sources above and extract it to a folder on your PC.

Open Device Manager: Right-click the Start button and select Device Manager.

Locate the Device: Look for an entry with a yellow triangle, often labeled "FT232R" or "USB-Serial", under "Other devices" or "Ports (COM & LPT)". Update Driver: Right-click the device and select Update driver. Choose "Browse my computer for drivers".

Navigate to the folder where you extracted the drivers and click Next.

Verify: Once installed, the device should appear as a "USB-to-Serial Comm Port" with an assigned COM number (e.g., COM3). Note for Cloned Cables: Some generic "

" cables use older Prolific chips that may require backdated drivers (v3.2.0.0 or v3.3.2.105) to work on Windows 10, as the latest official Prolific drivers often block non-genuine hardware.

Leica GEV189 USB download cable, the "new" driver compatible with Windows 10 (and Windows 11) is

. This driver allows data transfer between Leica Total Stations and modern 64-bit operating systems. Sunbelt Sales Download and Installation

You can typically obtain the driver from official Leica Geosystems partners or specialized surveying equipment portals: Driver Version : v1.70 is the standard for Windows 10/11 compatibility. Official Portals : Users often find these at SCCS Surveying Knowledge Base Sunbelt Sales Installation Method : It is recommended to use the executable (.exe) for pre-installation before plugging in the cable. Sentek Technologies Step-by-Step Setup Disconnect the Cable : Ensure the

cable is not plugged into your PC during the initial driver installation Run the Installer Windows 10 will try to "fix" your driver again

: Execute the downloaded driver file (v1.70) with administrative privileges. Disable Signature Enforcement (If Needed)

: If the driver fails to install because it is unsigned, you may need to restart Windows in Advanced Startup

mode and select "Disable driver signature enforcement" (typically option 7). Connect the Cable : Once the installer finishes, plug the into your PC's USB port Verify in Device Manager Right-click the button and select Device Manager Look under Ports (COM & LPT) for "USB Download Cable". Note the assigned COM Port number (e.g., COM3) for use in your data exchange software. Sentek Technologies Troubleshooting Common Issues PL2303 issues (Prolific USB to Serial Drivers) Win 11 15 Nov 2021 —

3. Select "USB Smart I/O Controllers -->> USB to Serial/Parallel" 4. Select "PL2303 -- Driver & Software" <<-- for PL2303HXD chip. Microsoft Community Hub USB cable drivers for Windows | Sentek Technologies 26 Jul 2022 —

The Leica GEV189 (734700) USB download cable is fully compatible with Windows 10 (both 32-bit and 64-bit versions), but because it uses a specialized serial-to-USB converter, it often requires a manual driver installation rather than relying on automatic Windows updates. Quick Setup Guide

Download & Extract: Obtain the official driver package (often labeled for GEV189/GEV195/GEV218) from a reputable source like the Leica myWorld Portal or specialized Surveying Knowledge Bases. Unzip the files to a folder on your desktop.

Connect the Hardware: Plug the USB end of the GEV189 into your PC and the 5-pin Lemo end into your Leica instrument (e.g., TS02, TS06, or DNA digital level). Manual Driver Update: Right-click the Start button and select Device Manager.

Look for an "Unknown Device" or a device labeled FT232R under "Other devices". Right-click it and choose Update Driver.

Select "Browse my computer for drivers" and navigate to the folder you extracted in step 1.

Confirm the Port: Once installed, the device will appear under Ports (COM & LPT) as "Leica USB Serial Port" or similar. Note the COM number (e.g., COM3) as you will need this in your data transfer software like Leica Infinity or Leica Geo Office. Troubleshooting Tips

No Port Found? If the "Ports" folder doesn't appear in Device Manager, try a different USB port directly on the PC, as USB hubs can sometimes cause power or signal issues.

"Windows 7/8" Drivers: Don't be alarmed if the driver folder is named for older versions of Windows; these drivers are typically compatible with Windows 10.

Software Compatibility: For data transfer, you may also need to install Leica Instrument Tools to facilitate communication between the instrument and the PC. Inside the molded USB plug housing is a

The GEV189 USB download cable (part number 734700) is a specialized 5-pin to USB-A cable used to transfer data between Leica Total Stations and a PC. While Windows 10 may sometimes recognize it automatically as a generic serial device, most professional applications require specific drivers to ensure stability and correct COM port assignment. Download and Driver Sources

You can find the necessary drivers through the following channels:

Official Leica myWorld Portal: The most reliable source for up-to-date drivers is the Leica myWorld website. Registered users can find the latest USB cable drivers under the "Tools" or "Software" tab for their specific instrument.

Specialized Survey Suppliers: Websites like Sunbelt Sales and G2 Survey host direct ZIP downloads for GEV189/GEV195/GEV218 drivers (often version 1.70 or newer).

Third-Party Retailers: If you purchased the cable from Amazon or eBay, it usually comes with a driver CD, though Windows 10 users often need to download digital versions for better compatibility. How to Install on Windows 10

If the cable is not automatically recognized, follow these manual installation steps:

---

Q: Will this driver work on Windows 11? A: Yes, the same driver version 3.3.2.105 works perfectly on Windows 11 as the driver model is similar to Windows 10.

Q: My GEV189 cable has 4 wires – what’s the color code? A: Usually Red = VCC (5V), Black = GND, White = TX, Green = RX. Always verify with a multimeter.

Q: Can I use this cable to unbrick my router/satellite receiver? A: Yes, provided your device has a serial console header (3.3V TTL logic, not RS-232). Never connect VCC unless the device requires external power.

Q: Why does my COM port disappear after reboot? A: The driver might have been overwritten. Repeat the installation and disable automatic driver updates via Group Policy.

---

Sometimes the built-in Windows 10 driver works with newer GEV189 cables (those with PL-2303TA or genuine chips).

If this succeeds, you’re done. If not, revert to Method 1.

---