Usb Device Id Vid 1e3d Pid 198a Updated | AUTHENTIC · HANDBOOK |

The USB Device ID VID 1e3d PID 198a identifies a USB Mass Storage Device, specifically a flash drive or card reader powered by a Chipsbank Microelectronics Co., Ltd. controller.  Technical Specifications 

Based on hardware databases and technical logs, this device typically uses the following hardware configuration:  Manufacturer: Chipsbank Microelectronics Co., Ltd. Vendor ID (VID): 1E3D Product ID (PID): 198A Common Controller Models: CBM2199S or CBM2199E Device Type: USB 2.0 Mass Storage (High Speed)

Reported Product Names: ChipsBnk Flash Disk, Flash Reader, or UDisk  Usage and Troubleshooting 

These devices are often budget or unbranded flash drives found on platforms like AliExpress or sold as OEM products. If you are experiencing issues (e.g., "Write Protected," "0MB Capacity," or "Device Not Recognized"), users typically rely on specific Chipsbank low-level formatting tools. 

Repair Tools: Community resources like USBDev.ru and FlashBoot.ru provide specialized utilities for Chipsbank controllers.

Diagnostics: To confirm the exact controller inside, tools like ChipGenius or Flash Drive Information Extractor are recommended.

Drivers: Most modern operating systems (Windows 7/10/11, Linux) use generic "USB Mass Storage Device" drivers for this hardware.  Performance Data 

USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft

The USB device identified by generic mass storage controller manufactured by Chipsbank Microelectronics Co., Ltd

. This specific ID is most commonly associated with affordable or generic USB flash drives and card readers. DeviceHunt Device Identification Vendor ID (VID): Chipsbank Microelectronics Co., Ltd. Product ID (PID):

– Often labeled as "Flash Disk," "HighSpeed," or "ChipsBnk Flash Reader". Common Product Names:

It may appear in Windows Device Manager as "USB Mass Storage Device" or under OEM names such as Lenovo for certain integrated readers. Typical Specifications & Performance Based on speed tests conducted by

, devices with these identifiers typically exhibit the following performance: Read Speeds: Vary widely from ~10 MB/s to ~48 MB/s. Write Speeds: Generally slower, ranging from ~3 MB/s to ~17 MB/s. Capacities:

Found in drives with reported sizes from 4 GB up to 265 GB+. Driver Update Information For standard mass storage devices like this one, Windows includes native drivers

that do not typically require manual updates from a manufacturer. Microsoft Learn Automatic Installation:

Windows automatically installs these class drivers from its internal DriverStore How to Update:

If you are experiencing issues, you can attempt to refresh the driver via Device Manager Right-click and select Device Manager Universal Serial Bus controllers Right-click your device and select Update driver Troubleshooting:

Be cautious of devices with this VID/PID reported as high-capacity (e.g., 16TB), as these IDs are sometimes used in "fake capacity" chips that misreport storage size. Are you experiencing a specific error code

(like "Device Descriptor Request Failed") or seeking a particular firmware tool to repair the drive?

USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft

Understanding USB Device ID: VID 1E3D & PID 198A The hardware identification string \VID_1E3D&PID_198A corresponds to a generic Flash Disk or mass storage controller manufactured by Chipsbank Microelectronics Co., Ltd.

. This specific ID is commonly found in budget USB flash drives, SD card readers, and occasionally in deceptive "high-capacity" storage devices sold on third-party marketplaces. Device Identification & Specifications

This device is identified by the operating system as a standard USB Mass Storage Device Vendor ID (VID): (Chipsbank Microelectronics Co., Ltd.). Product ID (PID):

(Commonly assigned to "Flash Disk" or "Flash Reader" products). Controller Model: Often utilizes the ChipsBank CBM2199E controller or similar variants. USB 2.0 (High Speed). Performance: Typical read speeds range from 15 MB/s to 36 MB/s , with write speeds between 4 MB/s and 12 MB/s Why You Might See This Device ID

If you are searching for this ID, you are likely encountering one of three scenarios: Driver Requirements: The device usually uses the generic Windows USB Mass Storage Class

driver. If it is not recognized, it may be due to a hardware failure rather than a missing driver. Fake Capacity Verification:

This specific VID/PID is frequently associated with "fake" drives—devices programmed to report much larger capacities (e.g., 2TB or 16TB) than they actually possess. Firmware Repair:

Users often look for this ID to find low-level formatting tools to "revive" a drive that has become read-only or shows "No Media". Recommended Maintenance Tools

If you need to update, repair, or verify a device with this ID, the following specialized utilities from are commonly used: usb device id vid 1e3d pid 198a updated

USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft

Introduction

When it comes to connecting peripherals to a computer, the Universal Serial Bus (USB) has become the de facto standard. USB devices are widely used for a variety of applications, from simple data transfer to complex device control. Each USB device is uniquely identified by a combination of its Vendor ID (VID) and Product ID (PID). In this article, we'll focus on the USB device with the ID VID 1E3D PID 198A and explore what it means, its applications, and what an update might entail.

Understanding USB Device IDs

Every USB device has a unique identifier, comprising a Vendor ID (VID) and a Product ID (PID). The VID is assigned to a company by the USB Implementers Forum (USB-IF), while the PID is chosen by the vendor to uniquely identify a specific product. Together, they form a pair that allows the operating system and device drivers to recognize and interact with the device.

The Device in Question: VID 1E3D PID 198A

The device with the ID VID 1E3D PID 198A is a specific product made by a company with the VID 1E3D. Without direct information from the vendor, we can only speculate on the device's functionality. However, based on the structure of USB device IDs and common practices, we can infer several things:

Possible Applications and Devices

Given the lack of specific details about VID 1E3D PID 198A, several types of devices could be identified by this ID:

The Meaning of an "Updated" USB Device ID

If a USB device's ID, specifically VID 1E3D PID 198A, has been updated, it implies that there has been a revision or change to the device's firmware, software driver, or possibly its hardware. Updates to device IDs are typically made to:

How to Update a USB Device with VID 1E3D PID 198A

Updating a USB device typically involves:

Conclusion

The USB device with the ID VID 1E3D PID 198A represents a specific product made by a vendor. While the exact nature and function of the device are unclear without further context, understanding the role of VIDs and PIDs in USB device identification can provide insight into how devices communicate with computers. Updates to such devices are crucial for ensuring optimal performance, security, and compatibility with evolving software and operating systems. If you're looking to update a device with this ID, ensure you follow the vendor's recommended procedures to safely and effectively update your device.

The error message blinked in the terminal window, a harsh, unblinking cursor mocking his efforts.

Error: Device Not Recognized. Vendor ID: 1e3d Product ID: 198a

Elias rubbed his temples, the blue light of the monitor casting long, skeletal shadows across his cluttered workbench. He was a digital archaeologist of sorts—a collector of the forgotten and the obsolete. He scoured estate sales and liquidation auctions for old hard drives, hoping to salvage family photos or lost manuscripts. But tonight, he was staring down a stubborn "black box."

It was a thumb drive, but unlike any he had seen before. It had no branding, no plastic casing. It was a solid block of brushed aluminum, cool to the touch, with a single LED that remained a stubborn, defiant red.

"Who are you?" Elias whispered.

He knew the codes. VID 1e3d usually pointed to smaller, off-brand Chinese manufacturers—Chipsbank, Phison, generic controllers. But PID 198a wasn't in his database. It wasn't in any database. He’d spent three hours scouring the dark corners of hardware forums and Linux kernel repositories. It was a ghost.

He sighed and typed the command again. lsusb -v.

The system scanned. The red LED on the drive flickered. For a split second, the terminal scrolled a cascade of data, then froze.

Device Descriptor: idVendor 0x1e3d idProduct 0x198a iProduct 2 "Securo-Key v4.0 - LOCKED"

"Securo-Key," Elias muttered. "Never heard of you."

He tried his suite of password crackers. Usually, these flash drives had simple hardware locks—unlock the controller, wipe the memory, sell it as refurbished. But this one wasn’t asking for a password. It wasn’t asking for anything. It was just... waiting.

Around 3:00 AM, Elias decided to get aggressive. He wasn't going to brute-force the password; he was going to bypass the controller entirely. He soldered wires directly to the NAND flash memory chips on the board, bypassing the USB interface. It was delicate surgery, the smell of rosin core solder smoke filling the small room.

He hooked the reader up to his rig. This technique usually forced the raw data to dump onto his screen in a chaotic mess of binary.

He hit Enter.

The screen didn't fill with garbage data. Instead, a single line of text appeared, printed slowly, character by character, as if typed by a human hand.

SYSTEM INTEGRITY COMPROMISED. ATTEMPTING FIRMWARE RECOVERY...

Elias sat up straight. He hadn't executed a command. The drive was executing him.

BIOS CHECK: FAILED. EXTERNAL POWER SOURCE DETECTED. UPDATING FIRMWARE...

"Updating?" Elias panicked, reaching for the kill switch on his external power supply. But before he could flip it, the red LED on the drive turned a brilliant, piercing white.

His speakers crackled—a sound like static, then a synthesized voice, calm and androgynous.

"Update complete. Vendor ID one-echo-three-delta confirmed. Product ID one-nine-eight-alpha engaged."

Elias stared. The PID had changed. 198a was gone.

The terminal refreshed. A new directory appeared on his desktop, simply labeled PAYLOAD.

He shouldn't have clicked it. Every instinct in his body screamed that this was malware, a trap left by a sophisticated hacker or a government spook. But curiosity was Elias’s original sin. He double-clicked.

A video file opened. It was grainy, recorded in low light. The timestamp in the corner read 1999-12-31 23:59:50.

A man sat in a chair, looking terrified. He was holding a newspaper; the headline was unreadable. Behind him, a clock ticked.

"I have to hide this," the man whispered into the camera, his voice trembling. "They said the world would end at midnight. They said it was a glitch. But it's not a glitch. It's a kill switch."

The timestamp rolled over to 2000-01-01 00:00:00.

The video didn't cut out. The world didn't end. The man in the chair looked at his watch, then back at the camera, tears streaming down his face. He smiled, a broken, relieved smile.

"It didn't trigger," the man said. "We survived."

Then, the man reached forward and unplugged the camera. The file ended.

Elias sat in silence. The "Y2K" bug. The great digital scare of the turn of the millennium. For decades, people joked about how nothing happened, how it was all hype. But this... this suggested something else.

He opened the metadata of the video file. Device Origin: Advanced Programs Division (APD). Status: Archived.

He looked back at the terminal. The cursor was blinking again, waiting for input. The VID 1e3d wasn't a generic Chinese manufacturer. It was a prefix for a black-budget project from the late 90s. And PID 198a... that was the update protocol. Cause: USB selective suspend or power management

The drive hadn't been locked to keep people out. It had been locked because its job was done. It was a "dead man's switch" drive, distributed to agents or engineers, designed to activate only if the central servers went offline—which would have happened if the Y2K bug had actually taken down the grid.

But the grid didn't go down. So the drives never activated. They went dormant, forgotten in desk drawers and sock drawers for twenty-five years.

Until Elias had forced the update.

Suddenly, the white LED on the drive began to pulse rhythmically.

His terminal screen cleared, replaced by a single prompt:

CONNECTION RE-ESTABLISHED WITH NETWORK NODE: COMMAND. AWAITING ORDERS.

Elias’s blood ran cold. He hadn't just recovered data. He had woken up a sleeper agent. And somewhere, in a server farm that hadn't seen traffic in a quarter-century, a light was blinking, alerting someone that Asset #198a was back online.

He reached for the hammer on his desk.

"Wait," the synthetic voice said, softening. "Do not terminate. We have much to discuss regarding the next deadline."

Elias froze, his hand hovering over the aluminum casing.

"The next deadline?" he whispered.

"Correct," the voice replied. "The countdown for the 2050 patch begins in four hours. We require a user with root access."

Elias looked at the hammer, then at the screen. He dropped the hammer. He typed:

User: Elias. Access Granted.

The screen flooded with code. The ghost of the Y2K crisis wasn't dead; it had just been waiting for someone to plug it in.

The USB device identified as mass storage device manufactured by Chipsbank Microelectronics Co., Ltd DeviceHunt Device Specifications Vendor (VID): 0x1E3D (Chipsbank Microelectronics Co., Ltd.) Product (PID): Device Name: ChipsBnk Flash Disk / HighSpeed Flash Reader USB 2.0 (High Speed) Controller Models: Frequently utilizes controller chips. Max Current: Usage and Known Issues Capacity Transparency:

This specific VID/PID combination is frequently found in generic or unbranded flash drives. In some documented cases, these controllers have been used in "fake capacity" drives (e.g., drives labeled as 2TB or 16TB that actually have much lower physical storage). Error Reports:

Recent user reports indicate issues such as the device being recognized but showing "No Media" (0 bytes capacity), often following partitioning attempts or firmware corruption. Performance: Speed tests recorded by tools like

show wide variability in read/write speeds depending on the actual NAND flash quality paired with the controller. Maintenance and Recovery

USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft

The USB device identification VID 1E3D and PID 198A refers to a Flash Disk manufactured by Chipsbank Microelectronics Co., Ltd..

Devices with these identifiers are typically USB 2.0 Mass Storage Devices. They are often found in generic or unbranded flash drives, as well as OEM versions of major brands like SanDisk or Samsung. 🔍 Technical Specifications

Vendor ID (VID): 1E3D (Chipsbank Microelectronics Co., Ltd.) Product ID (PID): 198A (Flash Disk / Flash Reader)

Common Controllers: Often uses CBM2199S, CBM2199E, or CBM2099E chips. Protocol: USB 2.0 High Speed. Current Draw: Typically 100mA. 🛠️ Common Issues and Troubleshooting

Users often encounter this specific ID when a drive becomes unrecognized or shows as "No Media" (0 bytes) in Windows. 1. Device Not Recognized

If the device appears in Device Manager as an "Unknown USB Device" but shows this VID/PID:

Update Drivers: Right-click the device in Device Manager, select Update driver, and choose Search automatically.

Power Management: In Device Manager properties, uncheck "Allow the computer to turn off this device to save power" under the Power Management tab. 2. "Please Insert Disk" / Write Protection If the drive is detected but cannot be opened or formatted:

It looks like you’re referencing a USB device identifier update:

The phrase "updated" could mean:

If you need help identifying the exact device, applying the update, or troubleshooting after the update, just give more context — I’ll be glad to help.

The usb device id vid 1e3d pid 198a updated keyword search often leads down a rabbit hole of sketchy driver download sites. To summarize safe practices:

At the time of this writing, there is no official, Microsoft-signed, fully updated driver for VID_1E3D PID_198A that enables all features on Windows 11 22H2 or newer. The device is functional only in limited serial or raw HID modes. If your system is stable with an existing driver, do not fix what isn’t broken—avoid manually forcing an "update" unless you have a specific, documented reason.

Last updated: For use with Windows 11/10 and Linux kernel 5.x+. If new drivers emerge from Chipsea or an OEM partner, this article will be revised accordingly. Always back up your system before making driver changes.

Title: The Anatomy of an Update: Analyzing USB Device ID VID 1e3d PID 198a

Introduction

In the complex ecosystem of modern computing, hardware peripherals operate through a silent but rigorous system of identification. Every device connected via the Universal Serial Bus (USB) carries a unique digital fingerprint: a Vendor ID (VID) and a Product ID (PID). These hexadecimal codes are the Rosetta Stone for operating systems, allowing them to identify hardware and load the appropriate drivers. Among the millions of connected devices, the identifier combination VID 1e3d PID 198a represents a specific, albeit niche, category of hardware. This essay explores the technical significance of this specific USB ID, the implications of updating drivers for such devices, and the broader context of hardware maintenance.

The Digital Fingerprint: Decoding 1e3d:198a

To understand the device, one must first decode the identifier. The VID 1e3d is assigned to a specific hardware vendor. In the context of USB-IF (USB Implementers Forum) assignments, this ID is often associated with specific integrated circuits or bridge controllers used in custom electronics, development boards, or flash storage devices. The PID 198a distinguishes this specific product model from the vendor's other offerings.

In many instances, VIDs and PIDs like 1e3d:198a appear in the context of USB-to-Serial controllers, development interfaces (such as those used for programming microcontrollers), or specialized industrial hardware. When a user searches for an "update" regarding this ID, they are typically encountering a scenario where the operating system—be it Windows, Linux, or macOS—has failed to automatically recognize the hardware, or the existing driver has become obsolete, causing connectivity issues. The "update" is not merely a software improvement; it is the critical link that transforms a generic "Unknown Device" into a functional tool.

The Imperative for Updates

The search for an updated driver for VID 1e3d PID 198a usually stems from the rapid evolution of operating systems. A driver that functioned seamlessly on Windows 7 or an older Linux kernel may trigger security warnings or fail to initialize on Windows 10/11 or modern Linux distributions.

For devices utilizing this specific ID, the update process often involves the installation of specific kernel drivers or dynamic library files (DLLs). In the case of bridge controllers or serial interfaces, an update is crucial for stability. An outdated driver for this ID might result in data packet loss, baud rate mismatches (in serial communication), or the dreaded "Device Descriptor Request Failed" error. Therefore, the act of updating is a restoration of functionality, ensuring that the legacy hardware can communicate effectively with modern software architectures.

Security and Authenticity

The process of updating a driver for a specific VID and PID also raises important questions regarding hardware authentication and security. In the modern cybersecurity landscape, drivers operate at the kernel level, meaning they have high-level access to the system. Updating the driver for VID 1e3d PID 198a requires sourcing the software from a verified repository.

Because many devices using this ID are potentially "white-labeled" (generic hardware sold under various brand names), users often struggle to find the correct manufacturer. Installing a generic driver with a matching VID/PID from an untrusted source poses a security risk. Thus, an "updated" status implies not just functionality, but verified compatibility and safety. The user must ensure that the update corresponds to the specific chipset architecture (x86 vs. ARM64) to prevent system instability.

Conclusion

The seemingly cryptic string "VID 1e3d PID 198a updated" represents a common narrative in the lifecycle of computer hardware: the struggle for continuity. As operating systems advance, the bridge between software and hardware—the driver—must be maintained and updated. For this specific device identifier, the update process is essential for transforming raw hardware potential into practical utility. Whether facilitating industrial data transfer, enabling a development board, or powering a specialized peripheral, the successful update of this driver ensures that the device remains a viable component of the user's digital arsenal, highlighting the enduring importance of proper hardware identification and driver maintenance.

The USB Device ID VID 1E3D PID 198A identifies a Flash Disk manufactured by Chipsbank Microelectronics Co., Ltd.. This specific hardware identifier is commonly found on a variety of USB 2.0 mass storage devices, including generic "no-name" flash drives, OEM storage solutions for brands like Lenovo, and promotional "pen drives". Understanding the Hardware ID Last updated: Based on current USB-IF database and

A USB device identifies itself to a host computer using a unique combination of two 16-bit numbers:

VID (Vendor ID) - 1E3D: Assigned to Chipsbank Microelectronics Co., Ltd., a major Chinese manufacturer of USB flash memory controllers.

PID (Product ID) - 198A: Specifically designates a high-speed Flash Disk product line using these controllers.

Devices with these identifiers typically use ChipsBank controllers such as the CBM2199S, CBM2199E, or CBM2098. Troubleshooting and Driver Updates

If your device is showing as "Unknown Device" or "No Media," you may need to update or reinstall its drivers. Because these are standard Mass Storage Class devices, they usually rely on the generic drivers built into Windows, Linux, and macOS.

USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft

The USB hardware identifier identifies a Flash Disk mass storage device manufactured by Chipsbank Microelectronics Co., Ltd DeviceHunt Technical Specifications

Devices using this specific ID combination are typically budget-friendly USB 2.0 flash drives. Super User Manufacturer:

Chipsbank Microelectronics Co., Ltd (also seen as "ChipsBnk"). Device Type: USB Mass Storage Device. USB 2.00 (High Speed). Current Draw: Max 100mA. Controller Model: Often utilizes the controller. Typical Performance:

User speed tests show highly variable performance, with read speeds ranging from 10 MB/s to 48 MB/s and write speeds between 3 MB/s and 17 MB/s Common Issues & Warnings

This particular VID/PID pair is frequently associated with "unbranded" or generic hardware and is often linked to the following scenarios:

This USB hardware ID belongs to a Chipsbank Microelectronics Flash Drive or Flash Reader.

The completed standard formatting for this hardware identifier string typically appears as:USB\VID_1E3D&PID_198A 🔍 Breakdown of the ID

Vendor ID (VID): 1E3D — Registered to Chipsbank Microelectronics Co., Ltd..

Product ID (PID): 198A — Corresponds specifically to their generic Flash Disk / Flash Reader controller units. 🛠️ Common Applications This specific hardware profile is heavily used in: Budget USB flash drives. Cheap promotional thumb drives.

Counterfeit high-capacity storage drives (which spoof actual space by looping memory). MicroSD and SD card readers.

If you are trying to recover data, repair this drive, or wipe it, I can guide you further. Let me know:

Is the computer recognizing the drive letter but not opening it? Is it giving you an "insert disk" or "read-only" error?

Are you trying to find the specific mass production tool (MPTool) to reflash the firmware? Chipsbank Microelectronics Co. Ltd - USBDev.ru

The USB device identifier VID 1E3D PID 198A corresponds to storage hardware manufactured by Chipsbank Microelectronics Co., Ltd. This specific ID is commonly found in a wide variety of OEM flash drives, memory card readers, and "no-name" USB sticks sold under different brand names like Lenovo or generic "Flash Disk" labels. Device Identification Details

When a computer detects a device with these IDs, it is typically identifying the USB controller chip rather than the external brand of the drive. Vendor ID (VID) 1E3D: Chipsbank Microelectronics.

Product ID (PID) 198A: Often identified as a HighSpeed Flash Disk or Flash Reader.

Common Controllers: This VID/PID pair is frequently associated with controller models such as CBM2098, CBM2199E, or CBM2199S. Why You Might Need an Update

Users typically search for an "updated" version of this device ID when encountering one of the following issues:

"Device Not Recognized": Windows may fail to assign a driver, listing it as an "Unknown Device".

Capacity Errors: The drive shows 0MB or the wrong total capacity, often a sign of firmware corruption.

Write Protection: The drive becomes "Read Only" and cannot be formatted through standard Windows tools. How to Update or Fix VID 1E3D PID 198A

Because these are standard Mass Storage Devices, they usually rely on generic Windows drivers. If you need to "update" or repair the device, follow these steps: 1. Basic Driver Refresh

Before seeking specialized firmware, try a standard driver update: Open Device Manager (Win + X). Expand Universal Serial Bus controllers.

Right-click USB Mass Storage Device (verify it matches VID 1E3D in Properties > Details), and select Update driver.

Alternatively, choose Uninstall device and restart your PC to let Windows reinstall the default driver. 2. Advanced Firmware Repair (Mass Production Tools)

If the drive is corrupted, you may need a Mass Production Tool (MPTool) specifically for Chipsbank controllers. These tools can "reflash" the controller to fix capacity or formatting errors. Chipsbank Microelectronics Co. Ltd - USBDev.ru

Dealing with "Unknown" USB Devices: A Guide to VID 1E3D & PID 198A

Have you ever plugged in a USB drive only to see the dreaded "Unknown Device" or "Mass Storage Device" with a yellow exclamation mark in your Device Manager? If you've dug into the properties and found

, you are not alone. These specific identifiers are surprisingly common in the world of budget flash drives and "unbranded" storage solutions.

Here is everything you need to know about this device ID and how to get it working again. What is VID 1E3D / PID 198A? Every USB device has a Vendor ID (VID) Product ID (PID) that tells your operating system which drivers to load. Vendor ID (1E3D): This belongs to Chipsbank Microelectronics Co., Ltd.

. They are a major manufacturer of USB controllers used by many third-party brands. Product ID (198A): This generally identifies the device as a ChipsBnk Flash Disk or generic USB Mass Storage Device

You’ll often find this ID in Lenovo-branded USB drives, generic "metal key" drives, and occasionally in fake high-capacity drives (like those 2TB or 16TB drives from discount sites that are actually only 16GB–32GB). How to Update or Fix the Driver

If your computer isn't recognizing the drive, it’s usually a driver or firmware issue. Since this device uses a Chipsbank controller, standard Windows drivers should work, but they sometimes need a nudge. NamingSystem USB VID and PID as a device identifier 15 Feb 2022 —

The USB device ID VID 1E3D PID 198A identifies a Flash Disk or Flash Reader manufactured by Chipsbank Microelectronics Co., Ltd.. This hardware combination is commonly found in generic or OEM USB flash drives and mass storage devices. Device Identification

Vendor ID (VID): 1E3D (Chipsbank Microelectronics Co., Ltd.) Product ID (PID): 198A (Flash Disk / Flash Reader)

Controller Model: Often associated with the ChipsBank CBM2199S controller.

Performance: Speed tests for this ID generally show sequential read speeds ranging from 10 to 48 MB/sec and write speeds from 3 to 17 MB/sec. Driver Update Guide

For standard mass storage devices like this one, Windows typically uses a generic USB Mass Storage Device driver. You rarely need to download specific manufacturer drivers unless the device is not being recognized. 1. Automatic Update via Windows Update

The simplest method to ensure your drivers are updated is through the standard system update process.

USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft

The VID 1E3D and PID 198A specifically refer to a device made by a company with the VID 1E3D. Without more context, it's challenging to provide detailed information about the device. However, I can guide you through some general information and possible updates regarding USB device IDs.

If a recent automatic update broke the device: