Vid 1e3d Pid 198a - Usb Device Id

If automatic reinstallation fails, point Windows to the correct driver:

Seeing USB Device ID VID 1E3D PID 198A on your system is not a cause for alarm. It is the signature of a Chipsailing fingerprint sensor, typically found in Chinese-brand laptops or external biometric dongles. The main challenge is driver availability – and most users can resolve this through optional Windows Updates, generic biometric drivers, or their laptop manufacturer’s support page.

If you have tried all the steps above and the device still does not work, it may be a hardware failure. Fingerprint sensors have limited write cycles and can fail after 2–3 years. In that case, disable the device in Device Manager or replace the module if your laptop supports it.

For further help, search online communities like Reddit r/techsupport or TenForums using the exact string VID_1E3D_PID_198A. Chances are, another user with the exact same laptop model has already found a working driver. Usb Device Id Vid 1e3d Pid 198a

Keywords: USB Device ID VID 1E3D PID 198A, Chipsailing driver, fingerprint sensor driver, 1e3d 198a driver, Windows Hello unknown device.

Last updated: 2025

Cheap USB drives often use recycled or low-quality NAND flash chips. When the flash memory degrades, the controller may still enumerate (show VID/PID) but fails to respond to read/write commands. This leads to “Unknown USB Device (Device Descriptor Request Failed)” or “The device is not migrated” errors. If automatic reinstallation fails, point Windows to the

If the MP Tool fails with “Bad Block Too Many” or “Download Fail,” you may need to short specific pins on the controller. This is a hardware-level recovery:

Caution: This step is for advanced users. Incorrect firmware can permanently brick the device.

Below is a step-by-step troubleshooting guide. Start with Step 1 and move down – do not jump to reformatting or firmware updates unless absolutely necessary. Keywords: USB Device ID VID 1E3D PID 198A,

The USB device ID VID 1E3D PID 198A identifies a Chipsbank CBM2099 series flash drive controller. While driver issues, firmware corruption, and counterfeit hardware are common, most problems are solvable using Windows Device Manager, the official Chipsbank MP Tool, or Linux command-line utilities. Always test cheap flash drives for fake capacity, and never store irreplaceable data on a single USB drive – regardless of its VID/PID.

If you fixed your device using this guide, share your experience below. If you are still stuck, provide the exact error code from Device Manager (e.g., Code 10, 43, 45) and we can troubleshoot further.

Keywords: VID 1E3D, PID 198A, Chipsbank CBM2099, USB device driver error, fix unknown USB device, flash drive controller, CBM2099 MP Tool, counterfeit USB drive.

Here is the detailed technical content regarding the USB device identified by VID 1E3D and PID 198A.

| Attribute | Details | | ------------------ | ----------------------------------------------------------------------- | | Company Name | Chipsea Technologies (Shenzhen) Corp. | | USB VID | 0x1E3D (7933 decimal) | | Industry | Semiconductor & Mixed-Signal IC Design | | Known Products | CSU series (8-bit MCUs), CS32 series (ARM Cortex-M0/M3/M4), Touch ICs, Battery Fuel Gauges | | Website | www.chipsea.com (Primarily Chinese/English) |