To flash Xiaomi devices with MediaTek MT6765 (e.g., Redmi 6, 9C) or (e.g., Redmi Note 8 Pro) chipsets, use the latest Smart Phone Flash Tool
(SP Flash Tool) to ensure compatibility with these newer processors 1. Essential Preparations Backup Data: Flashing will permanently erase all personal data. Download and install MediaTek VCOM USB Drivers on your PC. Download the official Fastboot ROM
specifically for your device model and extract it to find the Scatter file MT6765_Android_scatter.txt Ensure the device has at least 30% charge 2. Setup SP Flash Tool Launch Tool: Extract the SP Flash Tool package and run flash_tool.exe as an administrator. Download Agent (DA): If your device has secure boot, click next to "Download Agent" and select a specific DA file like MTK_AllInOne_DA.bin from the tool folder. Load Scatter File: tab, click Scatter-loading
, and select the scatter file from your extracted firmware folder. Auth File (Optional): Some modern Xiaomi devices require an Authentication File ); if so, select it in the "Authentication File" section. 3. Flash the Device Flash Mode: Set the drop-down menu to Download Only
Avoid "Format All + Download" as it can delete critical network (IMEI/NVRAM) data. Start Process: button in the tool. Connect Device: Power off your Xiaomi device completely. While holding Volume Down
(or both volume buttons), connect it to the PC via a USB cable. Wait for Completion: sp flash tool for xiaomi mtk mt6765 mt6785 hot
A red bar will appear first, followed by a yellow bar showing progress. Once finished, a Green Ring or "Download OK" message will appear. 4. Troubleshooting Common Issues
Guide to Using SP Flash Tool for Xiaomi MTK (MT6765 & MT6785)
The Smart Phone (SP) Flash Tool is a powerful utility used to flash stock firmware, custom recoveries, and unbrick devices powered by MediaTek (MTK) chipsets. For modern Xiaomi devices using processors like the MT6765 (Helio G35) and
(Helio G90T), the process requires specific steps to bypass secure boot protections. Core Requirements Before starting, ensure you have the following resources:
MediaTek (MTK) USB VCOM Drivers: Essential for your PC to detect the device in "Meta Mode" or "Preloader Mode". To flash Xiaomi devices with MediaTek MT6765 (e
SP Flash Tool: It is recommended to use the latest versions, such as SP Flash Tool v5.2404 or v6.x, for better compatibility with newer chips.
Stock Firmware: The official fastboot ROM for your specific Xiaomi model, containing the "scatter" text file. MTK Auth Bypass Tool : Crucial for Xiaomi MT6765 and devices to skip the "Authentication File" requirement. How to Flash Xiaomi MTK Devices
Flashing newer Xiaomi chips typically involves bypassing Secure Boot Protection to avoid "Status Sec Auth File Needed" errors. How To Use SP Flash Tool (Full Guide)
Alternatively, use Maui META or Modded SPFT with leaked auth file. Alternatively , use Maui META or Modded SPFT
This procedure assumes your Xiaomi MT6765 or MT6785 is hot to touch and won’t boot.
Do not use random versions. For MT6765/MT6785, use SP Flash Tool v5.2128 or v5.2204.
Critical Files:
SP FLASH TOOL ERROR: 8038
SP Flash Tool (also known as SmartPhone Flash Tool) is the official flashing utility for MediaTek-powered devices. Unlike Mi Flash Tool (which is for Qualcomm Xiaomi phones), SP Flash Tool communicates directly with the MediaTek BootROM (BROM) to write raw partition images—such as preloader, lk, boot, system, and vendor.
For Xiaomi models like Redmi 9 (MT6765), Redmi Note 8 Pro (MT6785), Redmi Note 9 (MT6765), and Poco M2 Pro (MT6785), SP Flash Tool is the only way to recover from a hard brick when the device won’t turn on or is stuck in an overheating loop.