"Good evening, my lovely little slaves to fate."
Shishimai Rinka was a highschooler who ran a small café named Lion House in place of her grandmother. She lived her life much like any other person her age, but one day, she was caught up in an explosion while returning home on the train alongside her friend, Hitsuji Naomi. In an attempt to save her friend's life, she shields her on instinct the moment the explosion goes off, losing her life in the process. However, before she knew it, she was back at Lion House, happily chatting with her friends as if nothing had happened in the first place.
A few days later, she found herself in a strange world. Here she met Parca, an odd girl claiming to be a goddess. It turns out that she had somehow become a participant in Divine Selection, a ritual carried out over twelve weeks by twelve people, which allowed them to compete in order to undo their deaths. What shocked Rinka most of all, however, was the presence of her friend Mishima Miharu amongst the twelve.
In order to make it through Divine Selection, one must eliminate others by gathering information regarding their name, cause of death and regret in the real world, then "electing" them.
This turn of events would lead to her learning about the truth behind her death, as well as her own personal regrets. She would also come to face the reality that Miharu was willing to throw her life away for her sake, as well as the extents to which the other participants would go to in order to live through to the end.
Far more experiences than she ever could have imagined awaited her now, but where will her resolve lead her once all is said and done...?
こんにちは、あいうえおカンパニー代表の飯田（あけお）です。
「FATAL TWELVE」のKICKSTARTERキャンペーンは、皆様のおかげで無事、目標金額に到達することができました。
ご支援いただいた皆様、本当にありがとうございました。
遅ればせながら、この場を借りてお礼を申し上げます。
振り返ってみると、キャンペーンの１か月間は長いようでとても短い期間でした。
キャンペーンの開始からおよそ１時間で目標額の半分近くに到達し、その後も約10日間で最初のゴールを達成しました。
最終的なキャンペーンの総額は$50,516、支援人数は1,089名、中国語・フランス語への翻訳決定というストレッチゴールまで到達いたしました。
念願のフルボイス化だけでなく、今までにない３ヶ国語への翻訳まで行えることになり、とても嬉しく思っています。
そして多くの皆様に期待していただいている一方で、その期待に応えられるものを制作しなければいけないな、と責任も感じています。
実はこのお礼を書いている時点で既にシナリオは最終段階で、間もなく音声収録のための台本化作業となっています。
これからは演出の指定やイラスト等の素材制作、そしてゲームとして組んでいく作業が本格的に進行していきます。
お届けまでいましばらくお待ちください。
最後に、個人的な感想を。
昨年の夏「FATAL TWELVE」を発表した時点でKICKSTARTERの実施はほぼ決まっていたのですが、時期やリターン内容、コストの確認、HPやPVの制作など想像以上に準備が多く、無事キャンペーンを開始できた時点でほっとしておりました。
結果を見ると想像以上に多くの方からご支援いただき、飛び上がりたいくらいに喜んでいます。
このお礼を書いている時点でそろそろシナリオ作業も完結しますが、ラストスパートが迫り胃の痛い限りです。
とはいえ、無事物語にFINと書くことができれば、イラストや音楽の制作、今回は更に収録も待っています！
初めて制作するあいうえおカンパニーのフルボイスゲーム。担当キャストの皆様がどんな演技をしてくださるのか楽しみで仕方がありません。
あらためまして、「FATAL TWELVE」KICKSTARTERキャンペーンにてご支援いただいた皆様、ありがとうございました。
そして「FATAL TWELEVE」に興味を持っていただいた皆様も、ありがとうございました。体験版を公開していますので、この機会にプレイしてみてください。
ぜひ、今後の情報にご期待ください！
以上をもって、KICKSTARTERキャンペーン終了およびお礼のご挨拶とさせていただきます。
今後とも「あいうえおカンパニー」をよろしくお願いいたします。
あいうえおカンパニー代表 飯田泰貴
Opening Movie
Fatal Twelve PV
Voiced Demo Teaser #1
Voiced Demo Teaser #2
Voiced Demo Teaser #3
Fatal Twelve Teaser Trailer
Based on version history, SMI MPTool v2536 typically supports:
| Controller Family | Common Models | |------------------|----------------| | SM325x | SM3257EN, SM3257ENAA, SM3259 | | SM326x | SM3267AB, SM3267AE, SM3268AB, SM3268P, SM3269 | | SM328x | SM3280, SM3281 (partial support in earlier v2536 builds) |
Note: v2536 is not for newer controllers like SM2259, SM2263 (NVMe), or SM2320.
If you have a corrupted drive or a specific project requiring this tool, follow these steps carefully.
Step 1: Verify Your Controller Do not run the tool blindly. You must confirm your drive uses an SMI controller.
Step 2: Driver Installation SMI tools usually require a specific filter driver to bypass Windows standard USB handling.
Step 3: Configuration (The Critical Part)
Step 4: The "Start" Process
SMI MPTool V2.5.36 v7 is a specialized production utility used primarily for repairing, formatting, and updating firmware on USB flash drives equipped with Silicon Motion (SMI) controllers. Key Performance Insights Reliability:
User reviews suggest this specific version (N0708v1) is considered stable and performs firmware flashing "carefully" compared to some subsequent versions like V2.5.31, which was noted for being more "glitchy". Controller Compatibility:
It was originally updated around June 2014 to support various SMI chips. It is particularly effective for TSOP-packaged memory on USB 3.0 controllers. Risk Level:
Like all Mass Production Tools (MPTools), it is an advanced utility. Users have reported that incorrect settings (such as fixing capacity to zero or improper "Pretest" configurations) can permanently "brick" a drive. Operational Considerations OS Support:
While newer versions support Windows 7 and Windows 10 (64-bit), many experts on specialized forums like recommend using Windows XP 32-bit
for older controllers to ensure maximum stability and proper driver communication. Alternative for Low-Quality Flash:
For "economy segment" drives (often found in brands like Silicon Power) that use downgraded flash memory, the standard SMI MPTool may fail. In these cases, the Dyna Mass Storage Production Tool is the recommended alternative. Flashing Time:
Actual firmware flashing can take significantly longer than expected. While some sources claim 2–3 minutes, real-world usage has shown flashing times between 1,000 to 1,400 seconds (roughly 17–23 minutes). SMI [Silicon Motion] - USBDev.ru
Before we dissect the version number, let’s clarify the core technology. SMI (Silicon Motion, Inc.) is one of the world’s largest manufacturers of SSD controllers. You will find their chips in drives from brands like ADATA, Kingston, Transcend, TEAMGROUP, and Intel.
The "MPTool" stands for Mass Production Tool. In a factory, this software formats the NAND flash chips, initializes wear-leveling algorithms, creates translation layers (FTL), and writes the firmware. For the end-user, it is the ultimate repair utility. It can:
If v2536 v7 doesn’t work, try:
| MPTool Version | Best for Controllers | |----------------|----------------------| | v2.5.63 | SM3268AB, SM3269 | | v2.5.72 | SM3281, SM3280 | | v2.5.81 | SM3282, SM3350 (USB 3.2) |
The smi mptool v2536 v7 verified remains the gold standard for resurrecting common SATA SSDs. It is not magic—it cannot fix physically degraded NAND chips or a blown power regulator. However, for firmware corruption, controller locks, or "0MB" capacity issues, this tool is the only solution short of a $1,000 PC-3000 system.
Final Pro-Tip: After a successful flash, do not trust the drive with critical data. Use it as a scratch disk or gaming drive. The fact that you needed MPTool indicates the NAND is likely in the early stages of failure.
Always download from verified sources (USBDev, Ru-Board, or trusted GitHub mirrors). Use it responsibly, and you can extend the life of a "dead" SSD by 12–18 months.
Have a specific error code not listed? Check the log.txt file inside the MPTool folder. The v2536 v7 engine logs every SMI command, which is why professionals trust the "verified" version over newer, buggy builds. smi mptool v2536 v7 verified
SMI MPTool v2.5.36 v7 (Verified) – Silicon Motion Flash Drive Repair Tool SMI MPTool v2.5.36 v7
is a professional-grade mass production utility designed for repairing, formatting, and restoring USB flash drives powered by Silicon Motion (SMI)
controllers. This specific version is widely recognized for its stability and "verified" status in recovering "Write Protected," "No Media," or unrecognized USB drives. Key Features Low-Level Formatting:
Revives drives that cannot be formatted through standard Windows tools. Firmware Restoration: Reflashes the controller to fix corruption issues. Write-Protection Removal: Clears hardware and software locks that prevent data entry. Capacity Correction:
Restores the original storage capacity of "fake" or corrupted drives. Controller Support: Optimized for the series (e.g., SM3257EN, SM3267, SM3268). How to Use SMI MPTool Identify Your Controller: Use a tool like ChipGenius to confirm your USB has an SMI controller. Launch as Admin: Extract the package and run smimptool.exe as an Administrator on Windows (Windows 7/10 recommended). Scan for USB: "Scan USB"
button. Your drive should appear in one of the numbered slots. Configuration: (default password is often ). Select the correct or default configuration for your specific controller. Start Repair: to begin the process. This will erase all data on the drive. Completion:
Wait for the status to turn green (OK). Unplug and replug your device. Important Safety Tips Backup First:
This tool performs a low-level format; all existing data will be permanently lost. Test Mode:
If the drive isn't detected, you may need to manually put the controller into "Test Mode" by shorting specific pins (only for advanced users). Source Verification: Always download from reputable repositories like to ensure the tool is free from malware. adjust the tone
for a specific platform (e.g., a forum post vs. a technical manual) or include specific controller models in the support list?
SMI MPTool V2.5.36 v7 is a specialized firmware flashing and mass production utility designed specifically for USB flash drives utilizing Silicon Motion (SMI) controllers. This tool is frequently used by technicians and advanced users to repair corrupted drives, restore "write-protected" storage, or re-partition flash memory at a hardware level. Overview of SMI MPTool V2.5.36 v7
The "MP" in MPTool stands for Mass Production. Manufacturers use these utilities to program the firmware and configure the internal settings of a USB drive before it hits the shelves. The V2.5.36 v7 version is highly sought after because it is "verified" to work with a specific range of SM3267, SM3268, and SM3271 controller series.
Unlike standard formatting tools found in Windows or macOS, SMI MPTool communicates directly with the controller chip. This allows it to bypass software-level errors that usually make a drive appear "unreadable" or "dead" to the operating system. Core Features and Capabilities
Low-Level Formatting: Wipes the NAND flash chip entirely, bypassing logical partition errors.
Firmware Restoration: Reinstalls the controller's operating software to fix "Device Not Recognized" errors.
Capacity Adjustment: Allows for the creation of fixed-size partitions or "Public/Secure" zones.
CD-ROM Partitioning: Can turn a portion of the USB drive into a virtual CD-ROM (ISO) drive, which is useful for creating permanent bootable recovery tools.
Bad Block Management: Scans the NAND for physical defects and maps them out so the controller avoids writing data to unstable sectors. When to Use This Specific Tool
You should look for the SMI MPTool V2.5.36 v7 if you encounter the following issues with an SMI-based drive:
The "Disk is Write Protected" Error: When you cannot delete or add files and standard formatting fails.
Incorrect Capacity: If a 64GB drive suddenly shows as only 8MB or 0MB.
Controller Malfunction: If the drive is detected in Device Manager but does not appear in File Explorer.
PID/VID Errors: When the Product ID or Vendor ID has been corrupted, preventing driver installation. How to Verify Your Controller Compatibility Based on version history, SMI MPTool v2536 typically
Before using V2.5.36 v7, you must ensure your drive actually uses a supported Silicon Motion controller. Using the wrong MPTool can permanently "brick" your device. Download Flash Drive Information Extractor or ChipGenius. Insert your USB drive and run the software.
Check the Controller Part Number. Look for strings like SM3267AB, SM3268AA, or SM3271.
Confirm the ISP Version. If your current firmware version matches the library within V2.5.36 v7, the "Verified" status ensures a higher success rate. Step-by-Step Recovery Guide
Extract the Utility: Download the SMI MPTool V2.5.36 v7 archive and extract it to a folder on your desktop.
Launch as Administrator: Right-click sm32Xtest.exe and select "Run as Administrator."
Scan USB: Click the "Scan USB" button. Your drive should appear in one of the numbered boxes.
Settings Configuration: Click "Settings" (the password is often blank or "320"). Load the .ini file corresponding to your specific controller model.
Start the Process: Press the "Start" button. Do not unplug the drive during this process.
Confirmation: If the box turns green and says "OK," the flash drive has been successfully reset to factory settings. Safety Warnings and Troubleshooting
Data Loss: This tool will erase 100% of the data on the drive. There is no way to recover files after a Mass Production flash.
Fake Capacities: Some users use this tool to "spoof" larger capacities on small drives. This is not recommended, as it leads to immediate data corruption.
USB 2.0 vs 3.0: For the most stable flashing process, plug the drive into a USB 2.0 port, even if the drive is USB 3.0. AI responses may include mistakes. Learn more
When dealing with a corrupted or "system freeze" USB drive, SMI MPTool v2.5.36 v7
(specifically version N0725v1) is a specialized mass production tool used to reflash the firmware of Silicon Motion (SMI) controllers. This utility is often the last resort for drives that are "Write Protected," showing "No Media," or causing OS instability. Overview of SMI MPTool v2.5.36 v7
This specific version is designed to support a wide range of SMI controllers, including popular models like the SM3257EN, SM3267, and SM3211. It operates by communicating directly with the flash controller to reset the drive's internal parameters, effectively restoring it to factory settings. Preparation Checklist
Identify Your Controller: Use a tool like ChipGenius to verify your "Controller Part-Number." This tool is specifically for SMI (Silicon Motion) chips.
Backup Data: Reflashing the firmware erases all data on the USB drive permanently.
OS Compatibility: It is highly recommended to run this tool on Windows 7 or Windows XP. Newer versions of Windows (10/11) often block the low-level drivers required for flashing, which can lead to "Fail" errors. Step-by-Step Restoration Process
Launch the Tool: Extract the .zip file and run sm32Xtest.exe as an administrator.
Scan for Device: Plug in your USB drive. Click the "Scan USB" (or "Refresh") button. Your drive should appear in one of the numbered slots. Configure Settings:
Click the "Setting" button. If prompted for a password, try 320 or leave it blank. Load the default configuration file (usually default.ini).
Under the "Pretest" option, select "Erase All Block" if the drive is severely corrupted, or "Default" for standard repairs. Flashing: Return to the main screen and click "Start".
Crucial: Do not unplug the drive or power off your PC during this process. The status bar will turn Green (Pass) or Red (Fail). If you have a corrupted drive or a
Finalize: Once the process is successful, unplug the drive and re-insert it. Windows should now prompt you to format the "newly discovered" device. Troubleshooting Common Errors
"Initial Param Fail": This usually means the software version does not support your specific NAND flash memory. You may need a different "v" version or a newer database.
Device Not Found: Ensure you are using a USB 2.0 port. USB 3.0 ports often cause communication sync issues with older MPTools.
Flash ID Not Found: The controller is responding, but it cannot recognize the memory chips. This might indicate a physical hardware failure. AI responses may include mistakes. Learn more
Pendrive freezes the system - how to fix it? - elektroda.com
* SMI MPTool v2. 5.36 v7 N0725v1. zip (5.3 MB) You must be logged in to download this attachment. www.elektroda.com
Pendrive freezes the system - how to fix it? - elektroda.com
* SMI MPTool v2. 5.36 v7 N0725v1. zip (5.3 MB) You must be logged in to download this attachment. www.elektroda.com
Verified Solution: SMI MPTool v2.53.6 V7
The SMI MPTool v2.53.6 V7 is a verified and reliable software tool used for managing and configuring SMI (Smart Multimedia Interface) devices. This tool is designed to work with various SMI products, providing users with a comprehensive interface to monitor, control, and adjust settings for optimal performance.
Key Features:
Verification and Validation:
The SMI MPTool v2.53.6 V7 has been thoroughly verified and validated to ensure its compatibility, stability, and performance. This verification process involves rigorous testing and quality assurance procedures to guarantee that the tool meets the highest standards of reliability and functionality.
Benefits:
The use of the SMI MPTool v2.53.6 V7 offers several benefits, including:
Conclusion:
The SMI MPTool v2.53.6 V7 is a verified and reliable software tool for managing and configuring SMI devices. Its comprehensive feature set, verification, and validation make it an essential tool for users seeking to optimize their SMI device performance and productivity.
Based on the specific version number you provided (v2536) and the label "verified," you are likely looking for a specific, older distribution of the SMI (Silicon Motion) MPTool used for flashing and mass-producing USB drives that use SMI controllers.
Here is a helpful guide regarding this tool, what it is used for, and how to utilize it safely.
WARNING: High Risk. This is not a standard user application. It is a factory tool.
Trusted sources (as of 2026 – but always verify):
Avoid:
The SMI MPTool v2536 v7 verified is specifically designed for the following bridge chips and controllers:
Warning: Do not use this tool on NVMe drives (SM2262, SM2263, SM2267). Those require the dedicated NVMe MPTool.
