Shell Alvania G3 is categorized as a Heavy Duty / Multi-Purpose Grease. Its NLGI 3 consistency makes it particularly suited for applications where a softer grease (NLGI 2) might leak out or fail to support the load.
Shell Alvania Grease 3 Go to product viewer dialog for this item. (also referred to as Shell Alvania G3
) is a high-performance, multipurpose industrial grease traditionally used for the lubrication of rolling and sliding bearings. While the specific "Alvania" branding has largely been phased out, the modern equivalent— Shell Gadus S2 V100 3 Go to product viewer dialog for this item.
—maintains the same technical specifications and performance characteristics. Technical Data and Specifications The technical data sheet (TDS) for Shell Alvania G3 Gadus S2 V100 3
defines it as a medium-to-hard consistency grease based on a lithium hydroxystearate soap thickener. Characteristic Specification (Typical) NLGI Consistency Grade 3 (Medium/Hard) Soap Type Lithium Hydroxystearate Base Oil Type Mineral Oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C 10.2–11 cSt Dropping Point 180°C - 190°C Color Brown or Light Yellow Operating Temperature -20°C to +130°C Key Performance Benefits
Oxidation and Mechanical Stability: Resists the formation of deposits and maintains its consistency even under severe vibrations or shock loading.
Corrosion Resistance: Fortified with anti-rust and anti-wear additives to provide protection in hostile industrial environments.
High-Temperature Reliability: Performance remains stable up to its peak operating temperature of +130°C, which helps extend bearing life.
Long Storage Life: Consistency does not degrade during prolonged storage. Common Applications
Due to its Grade 3 consistency, this grease is slightly stiffer than standard Grade 2 greases, making it ideal for vertical bearings and applications requiring better resistance to leakage. Shell Gadus S2 V100 3 - 400g - Lube finder
Shell Alvania G3 Data Sheet
Introduction
Shell Alvania G3 is a high-performance, lithium-based grease designed for use in a wide range of industrial and automotive applications. This data sheet provides an overview of the key characteristics, features, and benefits of Shell Alvania G3, as well as its typical properties and performance data.
Product Description
Shell Alvania G3 is a smooth, creamy grease with a lithium soap thickener and a high-viscosity index base oil. It is formulated to provide excellent lubrication and protection against wear, corrosion, and oxidation in a variety of applications, including:
Key Features and Benefits
Typical Properties
| Property | Unit | Value | | --- | --- | --- | | Appearance | - | Smooth, creamy | | Colour | - | Light brown | | NLGI Consistency | - | 3 | | Dropping Point | °C (°F) | 190 (374) | | Base Oil Viscosity | mm²/s (cSt) at 40°C (104°F) | 220 | | Thickener | - | Lithium soap | | Corrosion Protection | - | Excellent |
Performance Data
Health, Safety, and Environment
Shell Alvania G3 is formulated to be safe for use in a wide range of applications. However, as with any lubricant, it is essential to follow proper handling and use procedures to minimize risks.
Regulatory Compliance
Shell Alvania G3 meets or exceeds the requirements of various industry standards, including:
Conclusion
Shell Alvania G3 is a high-performance grease designed to provide excellent lubrication and protection in a wide range of industrial and automotive applications. Its excellent wear protection, corrosion protection, and oxidation stability make it an ideal choice for use in demanding environments. Consult the Shell Alvania G3 data sheet and product documentation for more information on its use and handling.
Shell Alvania G3 (now widely marketed under the updated name Shell Gadus S2 V100 3 Go to product viewer dialog for this item.
) is a high-performance, multipurpose industrial grease. Formulated with a high-viscosity index mineral base oil and a lithium hydroxystearate soap thickener, it provides reliable protection against wear, rust, and water washout.
Below is a scannable technical report compiled from the official safety and technical data parameters. 🛠️ Product Overview Thickener Type: Lithium soap Base Oil: Highly refined mineral oil NLGI Consistency: 3 Color: Brown Texture: Smooth and homogenous 💡 Key Benefits & Applications Shell Alvania Grease EPD
The product formerly known as Shell Alvania G3 (and also Alvania RL 3) has been renamed to Shell Gadus S2 V100 3
. It is a high-performance, multipurpose industrial grease with a lithium hydroxystearate soap thickener and mineral base oil. Lube finder Technical Specifications Test Method NLGI Consistency Grade 3 (Medium/Hard) Lithium hydroxystearate Base Oil Type Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Dropping Point 180°C – 190°C IP 396 / ASTM D566 Cone Penetration (Worked) 220–250 (0.1 mm) Operating Temp Range -20°C to +130°C Shell Gadus S2 V100 3 TDS Lubesta Product Sheet Key Features & Applications Reliable High-Temperature Performance:
Resists oxidation and deposit formation at operating temperatures up to +130°C. Mechanical Stability:
Maintains consistency under vibrations and shock loading, preventing leakage. Corrosion Resistance:
Provides effective protection in hostile or moist environments. Common Uses: Electric motor bearings. Rolling element and plain grease-lubricated bearings. Water pump bearings and sealed-for-life bearings. Shell Iraq Documentation Links Shell Alvania Grease R Series Overview | PDF - Scribd
If you are looking for the data sheet for Shell Alvania G3 , it is important to note that the Alvania line has been rebranded. The direct modern equivalent for this product is Shell Gadus S2 V100 3
Below are the key technical specifications and highlights typically found on the product data sheet (PDS) for this grease series. Shell Alvania G3 / Gadus S2 V100 3 Data Overview
This is a high-performance, multipurpose industrial grease designed for the lubrication of rolling element and plain bearings. Thickener Type : Lithium Hydroxystearate. NLGI Consistency : 3 (Medium/Hard). Base Oil Viscosity : 100 cSt at 40°C. Operating Temperature Range : -20°C to +130°C (-4°F to 266°F). : Light Yellow. Dropping Point : Typically 180°C or higher. Key Performance Features Oxidation & Mechanical Stability
: Resists the formation of deposits caused by oxidation at high temperatures and remains stable under vibrations, preventing leakage. Corrosion Protection
: Fortified with anti-rust additives to protect metal surfaces in hostile or humid environments. Water Resistance
: Offers reliable protection in applications where water may be present, such as water pump bearings. Long Storage Life shell alvania g3 data sheet
: Does not significantly change in consistency even during prolonged storage. Typical Applications Electric Motor Bearings
: Highly recommended due to its stability and high-temperature performance. Water Pump Bearings
: Its resistance to water washout makes it ideal for these components. Sealed-for-life Bearings : Often used in bearings that are not frequently serviced. General Industrial Use
: Suitable for various rolling and plain bearings operating under standard industrial loads. Safety and Handling Shell Gadus S2 V100 3 - 400g - Lube finder
Meddings M4/MF4 Pillar Drill This is the correct modern day equivalent grease which replaced Shell Alvania Grease 3. Lube finder Shell Gadus S2 V100 3 Grease (formerly Shell Alvania Rl3) Shell Gadus S2 V100 3 Grease (formerly Shell Alvania Rl3) Med-lab.co.uk Shell Gadus S2 V220 3
The Roll Stability test shows a penetration change of +30 max. This means Alvania G3 softens very little under shearing forces. In vibrating or high-torque applications, the grease retains its consistency and does not turn into a liquid run-off.
Important limitation from the data sheet: Do not use in central lubrication systems with very long (>50m) or small-diameter (<6mm) lines because NLGI 3 may cause pressure spikes. Also avoid high-speed spindle bearings (>10,000 RPM).
Alvania G3 is rated excellent for water resistance. In water washout tests, less than 10% of the grease is removed, making it suitable for applications exposed to water spray, humidity, or occasional flooding.
Introduction
In the world of industrial lubrication, few products command as much respect as the Shell Alvania family. Among its most popular variants is Shell Alvania G3, a high-performance lithium-based grease renowned for its mechanical stability, water resistance, and wide operating temperature range.
If you are searching for the Shell Alvania G3 data sheet, you likely need more than just a PDF download. You need a detailed breakdown of technical properties, NLGI consistency, dropping points, base oil viscosity, and real-world performance benchmarks.
This article serves as your complete technical resource. We will dissect the official data sheet, compare specifications, discuss compatible applications, and explain why this grease remains an industry standard for general industrial and maritime lubrication.
Always ensure you have the latest PDF directly from the source. You can download the official technical data sheet via the link below:
[Download Shell Alvania G3 / Gadus S2 V220 3 Data Sheet]
Note: Shell has transitioned the "Alvania" name to the "Gadus" portfolio. If you search for Alvania G3 and see Gadus S2 V220 3, do not worry—they are chemically identical.
Have a specific application question about this grease? Drop a comment below!
The product formerly known as Shell Alvania Grease RL 3 (often colloquially referred to as Alvania G3 or R3) has been rebranded as Shell Gadus S2 V100 3 [10, 12, 16]. It is a high-performance, multipurpose industrial grease designed for reliable protection in a variety of applications, particularly electric motor bearings [9, 16]. Key Technical Specifications
Data for the modern equivalent, Shell Gadus S2 V100 3, includes: Thickener Type: Lithium Hydroxystearate [7, 9]. NLGI Consistency: Grade 3 (Medium-hard consistency) [15]. Base Oil Type: Mineral oil [9]. Operating Temperature Range: Effective from approximately -20∘Cnegative 20 raised to the composed with power C +130∘Cpositive 130 raised to the composed with power C +140∘Cpositive 140 raised to the composed with power C
Color: Typically light brown or amber (though some Alvania formulations were historically green or blue for identification) [8]. Deep Features & Performance Benefits Shell Alvania G3 is categorized as a Heavy
Enhanced Stability: Designed to maintain its consistency over long storage periods and during high-shear operations, ensuring it doesn't leak out of bearings [9].
Oxidation & Corrosion Resistance: Fortified with specialized anti-oxidant, anti-wear, and anti-rust additives to protect metal surfaces under humid or high-temperature conditions [7, 9].
Water Washout Resistance: Offers significant advantages over conventional lithium greases in the presence of water, making it suitable for environments where moisture exposure is common [9, 17].
Electric Motor Optimization: The "Grade 3" hardness is specifically recommended by many OEMs for large electric motors to prevent over-greasing and ensure the lubricant stays in the bearing raceway at high RPMs [9, 16]. Typical Applications Rolling element and plain bearings. Electric motor bearings (primary use case). High-speed bearings operating at normal temperatures.
General machinery lubrication where a firmer grease is required to stay in place [16].
To ensure you have the exact match for your equipment, you can verify the latest technical specifications on the Shell Gadus S2 V100 3 Official Data Sheet.
The product originally known as Shell Alvania G3 (and its relative Alvania RL 3) has been rebranded and updated under the Shell Gadus line. Depending on the specific formulation you require, the current equivalent is typically Shell Gadus S2 V100 3 (formerly Alvania RL 3) or Shell Gadus S2 V220 3 (formerly Alvania EP 3). Shell Gadus S2 V100 3 (Primary Successor)
This is a high-performance, multipurpose industrial grease specifically recommended for electric motor bearings. Key Specifications: NLGI Grade: 3 (stiff/rigid consistency) Thickener Type: Lithium Hydroxystearate Base Oil: Mineral Operating Temperature: Up to +130∘Cpositive 130 raised to the composed with power C Appearance: Brown, semi-solid
Applications: Rolling element bearings, sealed-for-life bearings, and water pump bearings.
Data Sheet Access: View the technical data sheet on Shell's Official Site. Shell Gadus S2 V220 3 (Extreme Pressure Equivalent)
If your "Alvania G3" requirement refers to an Extreme Pressure (EP) version, use this product.
Shell Gadus S2 V100 3 EP General Purpose Lithium Grease beige 18kg
The Shell Alvania G3 data sheet is more than a technical document—it’s a certification of performance in demanding industrial environments. Its NLGI 3 consistency bridges the gap between soft, pumpable greases and stiff, high-temperature pastes.
When you need a grease that:
...Shell Alvania G3 is a proven, cost-effective choice.
Always keep a copy of the latest data sheet in your CMMS (Computerized Maintenance Management System) or lubrication logbook. Use the penetration, viscosity, and dropping point data to set relubrication intervals and ensure compatibility with your bearing manufacturer’s requirements.
Disclaimer: The technical values in this article are based on publicly available Shell product documentation as of the publication date. For critical applications, always refer to the current official Shell Alvania G3 data sheet and consult a lubrication engineer. This article is for informational purposes and does not constitute professional engineering advice.
Need More Technical Resources?
Bookmark this page for updates. For specific application queries or to request a batch-specific certificate of analysis, contact your local Shell distributor.
Shell Alvania G3 is a high-performance, lithium hydroxystearate grease designed for general industrial and automotive applications. Formulated with high-quality mineral base oils and advanced additives, it provides robust protection against corrosion, wear, and water washout. Shell Alvania Grease 3 Go to product viewer