Reset Epson L380-l382-l383-l385-l485-l386 Adjustment Program -

| Step | Action | |------|--------| | 1 | In the menu, select “Waste ink pad counter” | | 2 | Click “OK” to read current counter values | | 3 | Check boxes: “Main pad counter” and “Ink absorber counter” | | 4 | Click “Initialization” (or “Reset”) | | 5 | Confirm warning dialog – click “Yes” |

| Error | Likely Cause | Solution | | :--- | :--- | :--- | | "Communication error" | Using Wi-Fi or bad USB cable | Switch to a known-good USB cable. Disable wireless on the printer. | | "Model not supported" | Wrong version of tool | You need a newer adjustment program (v2.0.0 or higher for L385/L386). | | Program crashes on launch | Windows 10/11 security | Right-click > Properties > Compatibility > Run as Windows 7. | | Counter resets but error returns after 1 page | Physical pad is saturated; sensor shorted | Replace the physical waste ink pads physically. | | "Reset" button is greyed out | Printer not in service error mode | Force error by running 2-3 deep cleaning cycles until the printer locks. |

If the official Adjustment Program gives you a "Reset count limit reached" error, try WICReset. This is a paid utility ($10) that works for unlimited resets on these models.

Search for "Epson L380 Adjustment Program" or "Epson L385 Resetter." Do not download from random pop-up sites. Look for reputable printer forums or service centers. File size is typically 450KB–800KB. Be wary of viruses—scan the file with antivirus software. Reset Epson L380-l382-l383-l385-l485-l386 Adjustment Program

To reset the Protection Counter (Waste Ink Pad Counter) on Epson EcoTank L380, L382, L383, L385, L485, and L386 printers using the official or compatible Adjustment Program. This procedure is required when the printer displays:

If you cannot find a working reset tool or your motherboard is locked, consider these options:

  • Manual EEPROM Reset (Advanced)

  • Service Center

    • Sometimes the Adjustment Program crashes or won't detect your printer. Try these fixes:

    The Reset Epson L380-L382-L383-L385-L485-L386 Adjustment Program is an essential tool for any budget-conscious printer owner. It transforms a "dead" printer back into a fully functional device in less than five minutes. | Step | Action | |------|--------| | 1

    Remember the golden rules:

    By following this guide, you can avoid expensive repair shops and keep your EcoTank printing for thousands of pages more. If you found this article helpful, bookmark it – you will likely need to perform this reset again in 6 to 12 months.

    Ready to fix your printer? Proceed to Step 1 – download the tool safely, and say goodbye to the "Service Required" error forever. If the official Adjustment Program gives you a

    Disclaimer: This guide is for educational purposes only. Modifying your printer’s firmware counters may void your warranty. The author is not responsible for any physical ink leakage or damage resulting from resetting the counter without inspecting the waste pad.