Redsail Cutting Plotter Usb Driver Install -
Authorize and Connect:
Test with Cutting Software:
Many beginners confuse the driver with the cutting software (like SignMaster, Flexi, or Sure Cuts A Lot). Here is the distinction:
Most modern RedSail plotters use a generic serial-to-USB bridge chip. The most common is CH340, followed by PL2303 and CP2102. If you install the wrong generic driver, your plotter will vibrate but not cut.
Look at the back of your plotter near the USB port. Do you see a small, 8-pin black chip? Or check the included CD (if you still have a CD drive). The driver folder is often named by the chip, not by RedSail.
✅ Plotter powered ON before connecting USB
✅ Correct chipset driver installed (CH340/CP210x/CDC)
✅ COM port number identified and set in cutting software
✅ Baud rate matches plotter internal setting (check plotter menu: Interface → Baud)
✅ No other software (e.g., 3D printer host) using same COM port
✅ Windows Fast Startup disabled for persistent connection
If after all steps the RedSail plotter still isn’t cutting from USB, connect via serial cable (DB9) if your model has it – the logic is identical to USB-VCP, proving if the issue is driver or hardware.
Installing the RedSail Cutting Plotter USB Driver: A Step-by-Step Guide
Are you struggling to install the USB driver for your RedSail cutting plotter? Look no further! This article will walk you through the process of installing the driver, ensuring that your plotter is properly connected to your computer and ready to use.
What is a RedSail Cutting Plotter?
A RedSail cutting plotter is a type of digital cutting machine used for precision cutting of various materials, such as vinyl, paper, and fabric. These machines are commonly used in the sign-making, graphics, and textile industries.
Why Do I Need to Install a USB Driver?
To connect your RedSail cutting plotter to your computer, you need to install a USB driver. The driver acts as a communication bridge between your computer and the plotter, allowing you to send print jobs and control the machine.
Step-by-Step Installation Guide
Troubleshooting Tips
Conclusion
Installing the Redsail Cutting Plotter USB Driver: A Step-by-Step Guide
Are you struggling to install the Redsail cutting plotter USB driver on your computer? Look no further! This article will walk you through the process of installing the driver, troubleshooting common issues, and provide you with a comprehensive understanding of the Redsail cutting plotter and its USB driver.
What is a Redsail Cutting Plotter?
A Redsail cutting plotter is a type of computer-controlled machine used for cutting various materials such as vinyl, paper, and fabric. It is commonly used in the sign-making, graphics, and textile industries. The Redsail cutting plotter is a popular choice among professionals and hobbyists due to its precision, accuracy, and ease of use.
What is a USB Driver?
A USB driver is a software component that enables communication between a computer and a USB device, in this case, the Redsail cutting plotter. The driver acts as a translator, allowing the computer to understand the plotter's commands and send data to it.
Why is the Redsail Cutting Plotter USB Driver Necessary?
The Redsail cutting plotter USB driver is necessary for several reasons:
Downloading and Installing the Redsail Cutting Plotter USB Driver
To install the Redsail cutting plotter USB driver, follow these steps:
Troubleshooting Common Issues
If you encounter issues during the installation process, here are some common problems and solutions:
Configuring the Redsail Cutting Plotter USB Driver
After installing the driver, you may need to configure it to work with your computer and plotter. Here are some steps to follow:
Conclusion
Installing the Redsail cutting plotter USB driver is a straightforward process that requires attention to detail and patience. By following the steps outlined in this article, you should be able to successfully install the driver and start using your Redsail cutting plotter with your computer. If you encounter any issues during the installation process, refer to the troubleshooting section or contact Redsail support for assistance.
Additional Tips and Resources
By following these tips and resources, you should be able to successfully install and configure the Redsail cutting plotter USB driver and start creating amazing cuts with your plotter.
Installing a Redsail cutting plotter via USB is a straightforward process, provided you identify the correct driver chipset used by your specific machine model. 1. Identify and Download the Driver
Redsail plotters typically use one of two main USB-to-serial chipsets. You must install the driver that matches your hardware:
FTDI Driver: Common for many standard models. You can find this on official support pages like REDSAILCNC Help Files.
CH341 Driver: Used in several newer or budget models. This is available at retailers like Sign-in-Global.
Official Downloads: You can also check the Redsail Laser Archive for general cutting plotter USB drivers. 2. Physical Connection and Installation
Power On: Ensure the plotter is powered on and connected to your PC via the USB cable before starting the installation.
Run Setup: Locate the downloaded driver (often an .exe file like CH341SER.EXE) and run it as an administrator. redsail cutting plotter usb driver install
Confirm Installation: Follow the on-screen prompts and click "OK" or "Install" when finished. 3. Configure the COM Port
Windows assigns a virtual COM port to the USB connection, which your cutting software needs to communicate with the machine. Redsail Cutting Plotter Usb Driver Install
Installing the USB driver for a Redsail Cutting Plotter is a common bridge between unboxing the machine and completing your first vinyl project. Most setups follow a specific sequence to ensure the computer recognizes the plotter as a functional device rather than an unknown peripheral. The Installation Journey
Driver Preparation: Before connecting the cable, you typically need to obtain the driver, often found on the official Redsail website or the CD provided with the machine.
Software Installation: Run the driver setup (often named setup.exe or found in a compressed .rar file) and follow the prompts until the "installation complete" message appears.
Physical Connection: Once the driver is installed, connect the USB-USB cable between the plotter and your PC, then turn the machine on. Windows should automatically detect the new hardware at this stage.
Port Verification: In the Windows Device Manager, expand the "Ports (COM & LPT)" section. Your plotter will appear as a "USB Serial Port" followed by a COM number (e.g., COM3). Make a note of this number, as you will need it for your cutting software.
Software Setup: Open your design software—such as Artcut, Easy Cut Studio, or SignTools—and select the correct Redsail model and COM port. Common Success Tips Easy Cut Studio Available for all Redsail Vinyl Cutters
Installing the USB driver for a Redsail Cutting Plotter (such as the RS720C or RS1360C) is a multi-step process that involves installing the correct Virtual COM Port (VCP) driver and then mapping that port in your design software. 1. Identify and Download the Driver
Redsail plotters typically use one of two internal USB-to-serial chips. You must install the driver that matches your specific machine's hardware: CH340/CH341 Driver
: Used by many standard Redsail models. You can often find this as CH341SER.EXE from the manufacturer's site. FTDI Driver : Used in some specific "USB Port" versions. Check your Redsail User Manual
or the provided CD to see if your model requires the FTDI version. 2. Installation Steps for Windows
Follow these steps to ensure the computer recognizes the plotter: Connect Hardware
: Plug the USB cable into both the plotter and the PC, then power on the plotter. Run Installer file (e.g., CH341SER.EXE ) and click . Wait for the "Driver install success" message. Verify in Device Manager Right-click This PC/My Computer Device Manager Look under Ports (COM & LPT)
. You should see a "USB Serial Port" followed by a port number (e.g.,
Note: If it shows an error, right-click it and select "Update driver," then browse to your driver folder manually. 3. Software Configuration
Once the driver is installed, you must tell your software (ArtCut, FlexiSign, or CorelDRAW) which port to use. Using ArtCut Open ArtCut and go to the Select your device (usually and choose the that matched the one in your Device Manager (e.g., COM3). Flow Control Using FlexiSign Redsail Cutting Plotter User Manual for USB Port - emoc
Installing the USB driver for a Redsail Cutting Plotter requires setting up a virtual COM port so your design software (like Artcut, FlexiSign, or CorelDRAW) can communicate with the hardware. Redsail machines typically use either CH340/CH341 chipsets for their USB-to-Serial connection. 1. Download & Prepare the Drivers
Before connecting the plotter, ensure you have the correct driver files. Official Sources : Download from the official Hflaser Download Page RedsailCNC Help Files Driver Types FTDI Driver : Common for older or high-end models. CH341/340 Driver : Common for standard RS series plotters. Extraction : If downloaded as a , extract the contents to a folder on your desktop. 2. Physical Connection Connect the USB cable to the
on the right side of the plotter and an available port on your computer. the cutting plotter. Authorize and Connect :
Your computer may prompt that "new hardware was found" or "not recognized". 3. Install via Device Manager (Manual Method) installer doesn't work, use the Windows Device Manager: Right-click and select Device Manager Look for "Other Devices" or "Ports (COM & LPT)" with a yellow exclamation mark (often labeled "USB-Serial"). Right-click the device and select Update Driver "Browse my computer for drivers"
and select the folder where you extracted the downloaded files. Once finished, the device should appear as "USB-SERIAL CH340 (COMx)" "USB Serial Port (COMx)" 4. Configure Software Settings
Your cutting software must match the COM port assigned by Windows. Download - Hflaser
USB Driver for Cutting Plotter. USB Driver–FTDI. USB Driver–CH341SER. CH341SER.EXE - Nanjing Qinheng Microelectronics Co., Ltd.
The installation of the Redsail cutting plotter USB driver is often reported as a critical yet sometimes finicky process, primarily because the machine uses a USB-to-Serial bridge (commonly using CH341 or FTDI chips) rather than a native "plug-and-play" USB interface. Review of Installation Steps
Initial Setup: Users typically need to run the driver installer from the provided CD or download it directly from official sources like REDSAILCNC Help Files.
Virtual COM Port: The driver functions by creating a virtual COM port. Once installed, users must check the Windows Device Manager to identify which port number (e.g., COM3) has been assigned to the plotter.
Software Configuration: In programs like Artcut 2005/2009 or FlexiSign, the device must be set to "Redsail" with the output port matching the COM port identified earlier.
Technical Settings: Proper communication often requires specific "Handshaking" settings, such as XON/XOFF, to prevent data overflow during cutting. Common User Feedback & Issues
Stability: Some users find the native USB conversion drivers unreliable on modern operating systems, occasionally opting for a high-quality USB-to-Serial adapter cable to bypass the internal bridge.
Compatibility: While historically difficult on Mac, newer third-party software like Easy Cut Studio now offers improved native support for Redsail models.
Instruction Clarity: A frequent complaint is that manual instructions or driver discs can sometimes be in Chinese or lack detail for Windows 10/11 environments. Key Recommendations
Detect Port: Use the "Detect" button in your cutting software while power-cycling the cutter to help the system "see" the connection.
Verify Chipset: Ensure you are installing the correct driver for your specific unit (usually the CH340/341 or FTDI versions). Redsail Cutting Plotter User Manual for USB Port - emoc
This is a complete guide to installing the USB driver for a Redsail Cutting Plotter.
These machines (commonly the Redsail RS series like RS720C, RS1120C, etc.) are popular budget-friendly plotters, but they are notorious for having outdated driver discs and requiring a specific setup process to communicate via USB.
Here is the step-by-step guide.
If you work in a school or shared workspace where you cannot install drivers, use this workaround.
This will not install a permanent COM port, but it will allow your cutting software to talk via raw USB. Note: This is a last resort; COM port stability is superior.
Once you have the driver working, keep it that way. Test with Cutting Software :
Use Terminal (Tera Term / Putty):
Pro tip: The RS series driver also includes a firmware handshake. If your plotter’s LCD screen shows “Online” but the computer says “Offline,” you have the wrong RS driver version. Try v2.0 for Windows 10 and v1.8 for Windows 7.
