The manual provides a step-by-step:
The physical box includes a printed manual, but digital versions get updated. As of this writing, Manual Version 2.2 (released June 2024) includes:
To download the official QIDI X-Pro manual PDF:
Warning against third-party manuals: Many aggregator sites host outdated "QIDI X-Pro manual" files from 2019. These show the old rotary knob interface, not your touchscreen. Always verify the publication date.
Thank you for purchasing the QIDI X-Pro. Designed for both beginners and professionals, the X-Pro is a fully enclosed, dual-extruder 3D printer capable of printing with PLA, ABS, PETG, TPU, and other advanced materials. This manual provides essential instructions for safe operation, calibration, and maintenance.
Q: Where can I download the digital PDF manual for the QIDI X-Pro? A: If you lost the USB drive, you can usually find the PDF on the official QIDI Tech website under the "Support" or "Download" section, or by contacting their support email directly. qidi x-pro manual
Q: Does the QIDI X-Pro have auto-leveling? A: No, the standard X-Pro relies on manual leveling with springs and thumbwheels. However, many users choose to install third-party BLTouch sensors to automate this process.
Q: What file format does the X-Pro read?
A: The printer reads standard .gcode files. You must slice your STL files using Cura or Simplify3D before putting them on the SD card.
QIDI Tech X-Pro manual provides essential instructions for setting up and maintaining this dual-extruder 3D printer. While the physical manual is included in the box, digital copies and supplementary guides can typically be found on the QIDI Tech Official Support Page Key Setup Steps According to the standard setup process:
Remove all foam, security tape, and zip ties securing the X, Y, and Z axes. Physical Assembly:
Install the filament spool holders on the back of the machine. Initial Power On: The manual provides a step-by-step:
Select your language and check the voltage selector (110V/220V) to match your region. Bed Leveling: Navigate to Settings > Leveling
Use the provided leveling card or a standard piece of paper.
Adjust the three leveling nuts until you feel slight resistance when sliding the paper between the nozzle and the bed.
Repeat this for all four corners and the center to ensure consistency. Dual Extruder Configuration The X-Pro is known for its dual-extrusion system: SimplyPrint Nozzle Loading:
Heat the nozzles to the required temperature (e.g., 250°C for PLA) before advancing filament. Calibration: The physical box includes a printed manual, but
Ensure both nozzles are aligned at the same height to prevent the "idle" nozzle from dragging on the print. Software & Connectivity Qidi 3D Printer Setup Help Needed
The manual suggests replacing the nozzle. Usually, the cause is different: The left heat sink fan is failing. Because the left extruder is used more often, its cooling fan weakens first. If the fan doesn't spin at 100%, heat creeps up and softens the filament. Fix: Replace the 24V 40x40x10mm fan.
Even the best manual has blind spots. Here are the top three issues users face that are not adequately explained in the original text.
This is common in dual-extrusion setups. The manual covers "Nozzle Offset." You must calibrate the left nozzle height to match the right nozzle perfectly. If one is higher, it won't stick to the bed.