Nxos64-cs.10.2.4.m.bin Download <2025-2026>

  • Verify checksum:
  • Set the boot variable (example):
  • Reload device:
  • After boot, confirm version:
  • Validate functionality: check interfaces, routing protocols, ASIC/CPU utilization, logs.

    • Note: Exact commands and boot variable names differ between NX-OS releases and platforms. Follow platform-specific upgrade guides from Cisco.

    You can download this image only from the official Cisco Software Download portal. A valid Cisco SmartNet contract or support agreement is required.

    Steps:

    | Problem | Likely Cause | Solution | |---------|--------------|----------| | Download fails (403 Forbidden) | No contract or incorrect CCO privileges | Verify SmartNet entitlement; contact partner support | | Checksum mismatch | Incomplete download | Re-download; use SCP instead of TFTP | | Switch rejects .bin during boot | Incompatible hardware | Check Cisco HCL for 10.2.4 support | | Bootflash insufficient space | Old images not removed | delete bootflash:old-image.bin | | Upgrade hangs at “Unpacking image” | Corrupted .bin | Re-verify checksum; re-copy the file |

    Large enterprises can script the download via: nxos64-cs.10.2.4.m.bin download

    curl -u "username:password" \
  "https://api.cisco.com/software/download/.../nxos64-cs.10.2.4.m.bin" \
  -o nxos64-cs.10.2.4.m.bin
  • Check Space: Ensure bootflash has enough space for the new image and packages.
  • Verify Checksum: After download, verify SHA256/MD5 checksum against Cisco-provided values.
  • Staged Testing: If possible, test the image in a lab or maintenance window on non-production gear.
  • Plan Rollback: Keep a known-good image available on bootflash and document rollback steps.
  • Maintenance Window & Staff: Schedule downtime if required and have physical access or remote-console access (out-of-band).
  • Read Known Bugs/Caveats: Some releases require intermediate upgrades or special commands to migrate licenses/configs.

    • As a maintenance release (the 4th in the train), this image is considerably more stable than the initial 10.2(1) or 10.2(2) releases.

    Copy .bin to a FAT32-formatted USB drive, insert into switch, then: Verify checksum:

    switch# copy usb1:nxos64-cs.10.2.4.m.bin bootflash:/

    Verify transfer:

    switch# dir bootflash:

    Look for the file and note its size (should match source). Set the boot variable (example):