Nitocote Pe135 Msds 【HD】
(Obtain exact values from the product SDS.)
The MSDS states: "Do not use solvents other than those recommended by the manufacturer." Typically, Fosroc recommends Nitocote Thinner (Xylene-based) . Using acetone or toluene may alter fire properties and adhesion.
3.2 Mixtures Nitocote PE135 is a two-component system.
Part A (Base):
Part B (Hardener):
(Note: Specific percentages are typically withheld as trade secrets or provided as ranges in official documents.)
Nitocote PE135 Safety Data Sheet (SDS), formerly known as the Material Safety Data Sheet (MSDS), provides critical information for the safe handling and application of this hydrophobic polyester resin coating.
The following summary is based on standard safety documentation from and technical data. Product Overview
Nitocote PE135 is a single-component, grey liquid coating used for the chemical and abrasion protection of concrete. Petrolinetech
Underground protection, foundations, and as a combined protective coating and curing compound. Physical Properties: It has a specific gravity of approximately 1.23 to 1.28 20 raised to the composed with power cap C and is miscible with water. Composition:
It is water-based and free from coal tar pitch, hydrocarbon solvents, and aromatic amines. Safety and Hazard Identification
While formulated to be more environmentally friendly than solvent-based alternatives, standard precautions are still required: Health Hazards:
May cause slight skin or eye irritation upon contact. Some formulations may contain trace amounts of formaldehyde, which is toxic if swallowed and can cause serious eye damage. Eco-Toxicity:
Generally not regarded as dangerous for the environment, though it is not readily biodegradable. Flammability: The product is non-flammable Safe Handling and First Aid Inhalation Move to fresh air immediately. Rinse mouth thoroughly with water; do not induce vomiting. Skin Contact Wash with soap and water or resin-removing cream. Do use solvents. Eye Contact
Rinse immediately with plenty of water and seek medical treatment. Application and Storage Personal Protection: Use gloves, safety goggles, and barrier creams.
Keep in original, tightly closed containers in a cool, dry place ( is less than 25 raised to the composed with power cap C ). The shelf life is typically
Wet material can be cleaned with water. If dried, mechanical removal (like a scourer) is necessary.
Dispose of waste via a licensed contractor according to local regulations. Avoid runoff into drains or sewers. Petrolinetech
For full regulatory compliance, always refer to the specific version of the SDS provided by the manufacturer at the time of purchase, as can be found on the Fosroc Technical Data portal or more details on application rates for specific project types? Nitocote PE135 - Fosroc nitocote pe135 msds
Nitocote PE135 is an eco-friendly, single-component protective coating based on hydrophobic polyester resin. It is commonly used for corrosion protection on concrete substrates, foundations, and as a curing compound. Safety & Hazard Summary
While Nitocote PE135 is water-based and free from many common carcinogens like coal tar pitch, the Safety Data Sheet (SDS) still highlights important precautions: Petrolinetech Eye Contact : Can cause serious eye damage or irritation. Skin Contact
: May cause sensitisation or allergic reactions in sensitive individuals. Inhalation
: Prolonged inhalation of high concentrations may damage or irritate the respiratory system. : Toxic if swallowed. Handling & Personal Protection To ensure safe application, follow these recommended guidelines: Petrolinetech Protective Gear
: Wear tight-fitting chemical splash goggles, protective gloves, and appropriate clothing.
: Use barrier creams (e.g., Kerodex Antisolvent). If the product touches skin, wash immediately with soap and water; do not use solvents for cleaning skin. Ventilation
: Ensure adequate general and local exhaust ventilation when working in confined spaces.
: Store in a cool, dry, well-ventilated area in original containers at temperatures not exceeding 40°C. Application Guide Nitocote PE135 Data Sheet | PDF - Scribd
Nitocote PE135 is a single-component, water-based protective coating based on hydrophobic polyester resin. According to the Fosroc Nitocote PE135 Technical Datasheet, the product is non-toxic, eco-friendly, and free from hazardous materials such as coal tar pitch and hydrocarbon solvents. Safety & Hazard Summary
Classification: Generally classified as non-hazardous and non-toxic for standard use.
Skin Contact: May cause an allergic skin reaction or irritation in sensitive individuals. Eye Contact: Can cause serious eye irritation.
Environment: Some safety sheets indicate it contains substances harmful to aquatic life with long-lasting effects. First Aid Measures
Inhalation: Remove the person to fresh air. Seek medical attention if symptoms persist.
Skin Contact: Wash immediately with soap and plenty of water. Do not use solvents.
Eye Contact: Flush immediately with plenty of clean water for at least 15 minutes and seek medical treatment.
Ingestion: Rinse mouth. Do not induce vomiting; seek medical help immediately. Handling & Storage
Protective Equipment: Wear gloves, safety goggles, and protective clothing during application.
Ventilation: Ensure adequate ventilation, especially when used in confined spaces. (Obtain exact values from the product SDS
Storage: Store in a cool, dry, well-ventilated area in original containers at temperatures below 25°C. Nitocote PE135 - Fosroc
Nitocote PE135 is an eco-friendly, single-component liquid coating based on hydrophobic polyester resin. It is designed to provide high-performance waterproofing and corrosion protection for concrete and masonry. Key Features & Benefits
Dual-Action Performance: Functions as both a protective coating and a curing compound in a single application, saving time and labor.
Eco-Friendly & Safe: Water-based, non-toxic, and free from hazardous materials like coal tar pitch, hydrocarbon solvents, and aromatic amines.
Versatile Application: Can be applied to damp concrete that is only 24 hours old.
Durable Protection: Offers excellent resistance to chloride and sulphate ions, as well as a wide range of chemicals.
Weather Resistant: UV stable, meaning it won't deteriorate or fade under strong sunlight.
Ease of Use: A single-pack product that requires no mixing, reducing wastage. Safety & Handling (MSDS Summary) According to the Nitocote PE135 Safety Data Sheet:
Personal Protection: Wear safety glasses and chemical-resistant gloves (neoprene recommended) to prevent skin contact.
Ventilation: Ensure adequate ventilation during application to avoid inhaling vapors.
Storage: Keep the lid tightly closed when not in use; clean equipment and work areas daily.
First Aid: If skin contact occurs, wash thoroughly. For eye contact, rinse immediately with plenty of water and seek medical advice if irritation persists. Nitocote PE135 - Fosroc
Fosroc’s Nitocote PE135 is a single-component, grey-colored viscous liquid coating based on hydrophobic polyester resin. It is designed to provide high-performance chemical and abrasion resistance for concrete surfaces, particularly in underground applications and foundations Product Overview Eco-Friendly Composition
: Unlike many industrial coatings, Nitocote PE135 is free from hazardous materials such as coal tar pitch, hydrocarbon-based solvents, and aromatic amines. Dual Functionality
: It acts as both a protective coating and a curing compound in a single application, which helps save on labor and construction time. Versatile Application
: It can be applied to "green" concrete as young as 24 hours old. Technical Specifications Curing Time
: Surface drying is rapid, taking approximately 35–40 minutes at 20°C and as little as 4–6 minutes at 45°C. Resistance
: Exhibits excellent resistance to chloride and sulfate ions, as well as general chemical and UV exposure. Physical Properties Part B (Hardener):
: Features a specific gravity of 1.28 g/cm³ and a solids content by weight of 53%. Safety and Handling (MSDS Summary) Nitocote PE135 Safety Data Sheet (SDS) provides critical instructions for safe handling: Health Hazards
: The product is corrosive to the skin and can cause serious eye damage. Inhalation of high concentrations may irritate or damage the respiratory system, and it is toxic if swallowed. Protective Measures
: Always wear protective gloves, clothing, and eye/face protection (P280).
: If skin contact occurs, wash immediately with plenty of water (P302+P352). If eye contact occurs, rinse cautiously with water for several minutes and remove contact lenses if present. Storage and Disposal
: Store in a locked area (P405) and dispose of contents/containers in accordance with national regulations (P501).
For full technical documentation, you can refer to the official Fosroc Product Page or download the detailed Safety Data Sheet via Scribd. or a comparison with other Nitocote variants like the PU Aliphatic version? Nitocote PE135 - Fosroc
Understanding Nitocote PE135: Safety, Composition, and Protective Properties
Nitocote PE135 is a high-performance, single-component protective coating and curing compound manufactured by Fosroc. Based on a hydrophobic polyester resin, this water-based emulsion is primarily used for waterproofing and corrosion protection of concrete substrates, especially in underground structures and foundations.
The Safety Data Sheet (SDS)—formerly known as the Material Safety Data Sheet (MSDS)—is a critical document for understanding the product's chemical makeup and necessary safety precautions for handling, storage, and transport. 1. Composition and Hazard Identification
Nitocote PE135 is marketed as an eco-friendly, non-toxic alternative to traditional coatings.
Key Components: The viscous grey liquid contains ingredients such as talc and silica flour.
Safety Profile: Unlike many industrial coatings, it is entirely free from hazardous materials such as coal tar pitch, asbestos, and hydrocarbon-based solvents.
Health Hazards: While generally safe, the SDS identifies potential risks such as serious eye irritation and potential skin sensitivity in some individuals. 2. Safety Precautions and First Aid
Proper handling as outlined in the SDS ensures safe application and minimizes environmental impact. Fosroc Nitocote PE135 - Petroline Technical Services
Nitocote PE135 is a single-component, high-performance protective coating based on hydrophobic polyester resin. It is primarily used for waterproofing and corrosion protection of concrete substrates, particularly in underground structures and foundations.
Below is a comprehensive overview based on its Safety Data Sheet (SDS) and Technical Data Sheet (TDS). 1. Product Identification and Hazards Supplier: Typically provided by Fosroc.
Physical Hazards: Generally classified as non-hazardous for transport.
Health Hazards: Can cause eye irritation. While generally non-toxic and free from carcinogens like coal tar pitch or aromatic amines, some individuals may be sensitive to the resins. 2. Composition and Ingredients
The material is a viscous, grey liquid. Key listed ingredients in the SDS often include: Talc and Silica Flour as fillers. Hydrophobic Polyester Resin as the primary binder.
Free from hazardous hydrocarbon solvents and aromatic amines. 3. First Aid and Firefighting Nitocote PE135 - Fosroc