Meizu does not publicly host full SP Flash Tool ROMs on its official website. However, trusted community sources provide them:
Key firmware versions:
Always match the variant: international (A), Chinese (C), or India (I). Flashing the wrong region can cause network issues.
If SP Flash Tool continues to fail, consider these backups:
Meizu does not officially distribute scatter.txt factory ROMs via its website. Instead, developers create them from OTA updates. You need a prepared SP Flash Tool ROM.
The Meizu M3 Note is an Android-based midrange phone (MediaTek Helio P10/MT6755 or MT6755M depending on variant). Flashing firmware can restore a bricked device, remove firmware bugs, or install updates. For many MediaTek-based phones, the SP Flash Tool (Smart Phone Flash Tool) is a common utility used to read, write, or format device partitions via a Windows PC.
Meizu’s Live Suite (MiFlash for Meizu) is official and safer for unbricking, but it requires the phone to enter download mode (Volume Up + insert USB).
However, for dead/bricked phones, SP Flash Tool is the only way.
To flash firmware on your Meizu M3 Note using the SP Flash Tool
, follow this step-by-step guide. This process is typically used for restoring a "bricked" device or installing a fresh stock ROM. Prerequisites MediaTek (MTK) USB Drivers
: Essential for your PC to recognize the device in flashing mode. SP Flash Tool
: The official utility for MediaTek devices like the M3 Note (MT6755 Helio P10). Stock ROM (Firmware)
: Ensure you download the correct version for your model (e.g., International/Global or Chinese variants). USB Cable & PC
: A stable connection is vital to avoid hard-bricking the phone. Step-by-Step Flashing Guide Extract Files
: Unzip the SP Flash Tool and the Stock ROM firmware into separate folders on your computer. Launch Flash Tool : Open the SP Flash Tool folder and run flash_tool.exe as an administrator. Load Scatter File tab, click the Scatter-loading
Navigate to your extracted Stock ROM folder and select the Android scatter file (e.g., MT6755_Android_scatter.txt Configure Settings
Ensure all partitions (system, recovery, boot, etc.) are checked in the list. Set the drop-down menu to Download Only meizu m3 note firmware sp flash tool
Avoid "Format All + Download" unless absolutely necessary, as it may erase your IMEI/NVRAM data. Initiate Flashing button in the tool. your Meizu M3 Note completely.
While the phone is off, connect it to the PC via USB. You may need to hold the Volume Down
button while plugging it in to trigger the MTK preloader mode. Completion
A red bar will appear first, followed by a yellow progress bar.
disconnect the cable until a green checkmark or "Download OK" window appears.
: Disconnect your phone and power it on. The first boot can take up to 10 minutes. Important Notes Firmware Mismatch
: Flashing the wrong version (e.g., Global firmware on a Chinese model without changing the ID) can lead to a "firmware is too old" error or boot loops.
: This process will wipe all user data. Back up your files if possible. Alternative Method
: If the device still powers on, you can often update via the built-in Recovery mode by placing an update.zip in the root storage and holding Volume Up + Power
For more specific troubleshooting or the latest firmware links, the Meizu M3 Note section on 4PDA is a comprehensive community resource. Are you attempting to a dead device or simply change the region of your current firmware?
Guide to Flashing Meizu M3 Note Firmware via SP Flash Tool The Meizu M3 Note is powered by the MediaTek MT6755 (Helio P10) chipset. Because it uses MediaTek hardware, the SP Flash Tool
is the primary utility used for "unbricking," updating, or restoring the device to its official stock ROM. Prerequisites
Before starting, ensure you have the following components prepared: MediaTek USB VCOM Drivers
: Essential for your PC to recognize the device in "Preloader" mode. SP Flash Tool : The official flashing utility for Windows or Linux. Stock Firmware
: Download a firmware package specific to the Meizu M3 Note (e.g., version ) that includes a Scatter file (a text file ending in Meizu does not publicly host full SP Flash
: Flashing will erase all data. Back up important files before proceeding. Step-by-Step Flashing Instructions Launch the Tool : Extract the SP Flash Tool folder. Right-click flash_tool.exe and select Run as Administrator Load the Scatter File In the "Download" tab, click the Scatter-loading Navigate to your extracted firmware folder and select the MT6755_Android_scatter.txt Configure Flashing Mode Download Only from the dropdown menu.
: Avoid "Format All + Download" as it may erase your device's IMEI and NVRAM data. It is often recommended to uncheck the Preloader
box unless you are fixing a completely "bricked" device to minimize risk. Initiate Download : Click the button (green arrow) in the tool. Connect the Device Completely power off your Meizu M3 Note. Connect it to the computer via USB cable. If the tool doesn't detect it, try holding the Volume Down button while connecting. Completion
: A red progress bar will appear, followed by a yellow bar. Once finished, a green ring or "Download OK" window will pop up. Troubleshooting Tips Firmware Too Old
: If you encounter a "firmware is too old" error in recovery, you may need to use an alternative tool like for specific version downgrades. Device Not Detected : Ensure the MediaTek drivers are correctly installed in Windows Device Manager. : If the device fails to boot after flashing, try a Hard Reset by holding Volume Up + Power and selecting "Clear Data" in the recovery menu. (Global vs. Chinese) or more detailed driver installation Hard Reset MEIZU M3 Note
Meizu M3 Note Firmware Overview
The Meizu M3 Note is a popular Android smartphone that was released in 2016. It comes with a 5.5-inch Full HD display, a MediaTek Helio P10 processor, 2GB/3GB of RAM, and 16GB/32GB of internal storage. The device runs on Flyme OS, a customized Android-based operating system developed by Meizu.
Firmware Details
SP Flash Tool Overview
The SP Flash Tool is a popular software tool used to flash firmware on Android devices, including the Meizu M3 Note. It allows users to flash stock firmware, custom ROMs, and other software packages on their devices.
Using SP Flash Tool with Meizu M3 Note
To use the SP Flash Tool with the Meizu M3 Note, follow these steps:
Advantages of Using SP Flash Tool
Precautions and Risks
Common Issues and Solutions
By following these guidelines and taking necessary precautions, users can successfully flash firmware on their Meizu M3 Note using the SP Flash Tool.
Troubleshooting & Reviving the Meizu M3 Note: A Guide to SP Flash Tool
Flashing firmware on a Meizu M3 Note is a common solution for unbricking a device, removing passwords, or rolling back buggy software. Because this device uses a MediaTek MT6755 (Helio P10) chipset, the SP Flash Tool (Smartphone Flash Tool) is the primary utility used for deep system-level flashing. Essential Preparation
Before you start, gather the necessary files and tools. Using incorrect files can lead to a "hard brick" that is difficult to fix.
Firmware: Download the specific stock ROM for your model (e.g., M681H or L681). You can find these on community hubs like 4PDA or Hovatek.
Drivers: Install the MTK VCOM drivers on your PC to ensure the computer recognizes the phone in "Preloader" mode.
SP Flash Tool: Download the latest version of the SP Flash Tool and run it as an Administrator. Step-by-Step Flashing Process
Flashing the Meizu M3 Note Go to product viewer dialog for this item.
using the SP Flash Tool is a standard procedure for unbricking the device or switching between firmware versions (like China to Global ROMs). Because the device uses the MediaTek Helio P10 (MT6755) chipset, it is fully compatible with this tool. Performance Review: Flashing Experience Using the SP Flash Tool on the
is generally reliable, but it has specific quirks compared to other MediaTek devices:
Success Rate: High for "Hard Bricked" devices that won't enter recovery mode.
Ease of Use: Moderate. It requires finding a specific Scatter file (partition map) included in the stock ROM folder.
Driver Sensitivity: Extremely high. The tool often fails if the correct VCOM drivers are not installed, sometimes resulting in a "STATUS_BROM_CMD_STARTCMD_FAIL" error. Key Firmware Considerations Unbricking a hard bricked Meizu M3 Note
When discussing the Meizu M3 Note (model M91) and using SP Flash Tool (Smart Phone Flash Tool), the "good features" refer to the specific advantages this combination offers for repairing and customizing the device. Because the Meizu M3 Note uses a MediaTek (MTK) processor, SP Flash Tool is the most powerful utility available for it.
Here are the standout features and benefits of using SP Flash Tool for the Meizu M3 Note firmware: Key firmware versions: