(Logo Placeholder: Life Probo)
6.1 First Start-Up
6.2 Daily Operation
6.3 Emergency Stop
Press red [E-STOP] or unplug cord. (Logo Placeholder: Life Probo)
6
Never run the PR70 without a filter – page 7 explains troubleshooting. cord loose | Check outlet
| Problem | Likely cause | Action | |---------|--------------|--------| | No power | Outlet dead, cord loose | Check outlet, reseat cord | | Display error “E01” | Sensor fault | Reboot, if persists → service | | Inconsistent operation | Interference | Move away from large motors/transformers | | Overheating | Blocked vents | Clean vents, reduce runtime | | Buttons unresponsive | Static or firmware glitch | Power cycle 30 sec | 6.2 Daily Operation
Reset procedure: