The chipset uses the rt73usb kernel module:
sudo modprobe rt73usb
If not auto-loaded, create /etc/modprobe.d/rt73.conf with:
alias wlan0 rt73usb
Then:
sudo update-initramfs -u
LG CE0560 is a USB Wi‑Fi adapter for select LG devices; drivers are usually provided via LG TV firmware or by the adapter’s chipset vendor (Realtek/MediaTek) for PC use.
A driver is the software bridge that allows your operating system (Windows, macOS, Linux) to communicate with the hardware. Without the correct driver for the CE0560:
The LG CE0560 wireless adapter is functionally obsolete for modern high-speed networks but can still operate in legacy environments or low-security 2.4 GHz networks. The driver is not officially available from LG; successful installation depends on using Ralink RT2571/RT73 reference drivers with proper OS compatibility workarounds.
For production use or Windows 10/11 daily driving, replacing the adapter is strongly recommended. For hobbyists or legacy system maintenance, the driver exists and can be made functional with the instructions above.
Report prepared by: Technical Analysis Unit
Date: [Current Date]
Version: 1.0
You're looking for the driver for the LG CE0560 wireless adapter. Here are some steps to help you find and install the driver: lg ce0560 wireless adapter driver
Method 1: LG's Official Website
Method 2: Windows Update
If you're using a Windows operating system, you can try updating the driver through Windows Update:
Method 3: Third-Party Driver Update Tools
You can also use third-party driver update tools to scan your system and update the driver. Some popular options include:
Please be cautious when using third-party tools, as they may bundle additional software or malware.
Driver Details
If you're still having trouble finding the driver, here are some details to help you: The chipset uses the rt73usb kernel module: sudo
Additional Tips
is not a technical model number for a wireless adapter; rather, it is a regulatory mark (the CE mark followed by the 0560 Notified Body number) commonly found on the LG AN-WF100 Go to product viewer dialog for this item.
Wi-Fi USB Dongle. This adapter was originally designed to provide wireless internet to LG Smart TVs from 2010–2011.
Below are the details and steps required to install the correct drivers for this device on a PC. 🛠️ Technical Specifications
The device is built on a Broadcom chipset and supports the following standards: Interface: USB 2.0. Standards: IEEE 802.11a/b/g/n. Bands: Dual-band support (2.4GHz and 5GHz). Speed: Up to 300 Mbps. 📥 Driver Download & Installation
Since LG does not provide official Windows drivers for this TV-specific dongle, you must use compatible third-party drivers or "force-install" a similar Broadcom-based driver. Option 1: The Netgear WNDA3100v2 Method (Recommended)
This is the most reliable way to get the adapter working on Windows 10 or 11. Download: Search for and download the Netgear WNDA3100v2 driver.
Install: Run the installer. If a "Netgear Genie" screen asks you to plug in the adapter, simply close the program. If not auto-loaded, create /etc/modprobe
Connect: Plug the LG adapter into your USB port. It will likely appear as an Unknown Device or Remote Download Wireless Adapter in the Windows Device Manager. Manual Update: Right-click the unknown device and select Update Driver.
Choose Browse my computer for drivers > Let me pick from a list of available drivers on my computer. Network adapters. Choose Netgear as the manufacturer and select Netgear WNDA3100v2 N600 Wireless Dual Band USB Adapter from the list.
Click Yes on any compatibility warnings to finish the installation. Option 2: Generic LG Wireless USB Installer
Some third-party driver repositories host a dedicated "LG Wireless USB Adapter Installer" (Version 10.1.37.98) which supports Windows XP through Windows 11. ⚠️ Important Troubleshooting Hardware ID: To confirm your device is definitely the
, you can check its Hardware ID in Device Manager (Properties > Details > Hardware Ids). It typically starts with USB\VID_043E&PID_3001.
Port Compatibility: Ensure you are using a USB 2.0 or 3.0 port directly on the motherboard for the best signal stability.
Legacy Support: If using Windows 7 or older, you may need the specific driver files for the Broadcom BCM4323 chipset.
If you are trying to use this for a specific project (like a Raspberry Pi or Linux build), I can look up the Linux kernel module commands for you.
Wi-Fi® USB Adapter for Select 2011-2010 TVs - LG Electronics
IEEE 802.11a/b/g/n. Enables wireless LAN for Broadband and DLNA. USB 2.0. LG Wireless USB Adapter Drivers Download for Free