This process assumes you have basic command-line knowledge. Follow carefully.
If you dislike Lollipop or encounter major issues, you can return to official Huawei KitKat (Android 4.4.2).
Method – Force flash stock firmware using dload method:
Note: Bootloader will remain unlocked, but you can re-lock it using fastboot oem lock.
| Issue | Solution | |-------|----------| | Camera crashes | Use Open Camera from Play Store. | | Wi-Fi disconnects | Set “Keep Wi-Fi on during sleep” to Always. | | GPS no lock | Use FasterGPS to set correct region NTP server. | | Bluetooth audio stutter | Disable Wi-Fi scanning, set Bluetooth codec to SBC. | | Screen rotation lag | Disable “Auto-rotate” and use a toggle widget. |
Required Files:
Manual Update Steps:
Post-Update Steps
Troubleshooting
Lollipop Features and Changes
The Lollipop update for Huawei MediaPad X1 7.0 brings various new features, including:
Enjoy your updated Huawei MediaPad X1 7.0 with Lollipop!
To update your Huawei MediaPad X1 (7.0) to Android 5.1.1 Lollipop, you generally need to perform a manual "local update" using an SD card. While official Over-the-Air (OTA) updates may no longer be pushed to older devices, you can still flash the firmware manually. 1. Preparation and Backup Identify Your Model: Settings > About Tablet . Common models are Battery Charge: Ensure your battery is at least 60% charged to prevent the tablet from dying during the flash. Backup Data:
This process may wipe your device. Back up important photos and files to a PC or cloud storage. You will need a microSD card with at least 2GB of free space 2. Download the Firmware huawei mediapad x1 70 update lollipop install
Since Huawei's official consumer site has phased out many legacy downloads, you may need to source the firmware from reputable archive sites. Search for the firmware builds (common Lollipop versions for the X1). Look for a folder or a file that contains a file named UPDATE.APP 3. Prepare the SD Card Connect your SD card to your computer. Create a new folder in the root directory of the SD card named UPDATE.APP file into this Correct Path: SD Card/dload/UPDATE.APP 4. Install the Update There are two ways to trigger the installation: Method A: System Menu (Recommended) Insert the SD card into your MediaPad X1. Settings > Updates > Menu > Local Update The tablet should detect the file. Select it and tap
The device will reboot and begin the update process (this takes 5–15 minutes). Method B: Force Update (If the tablet won't boot) Turn off the tablet completely. Insert the SD card. Press and hold the Volume Up + Volume Down + Power buttons simultaneously.
Release them once you see the Huawei logo or the "Software Installing" progress screen. HUAWEI Global 💡 Troubleshooting Tips Installation Failed:
Ensure the firmware you downloaded matches your exact model number (e.g., don't flash software onto a "Update Not Found": Make sure the folder name is exactly (lowercase) and the file is named UPDATE.APP Google Play Services:
Some Lollipop versions (especially Chinese variants) may not include Google Play. You might need to install them manually using an APK installer or Huawei HiSuite for your exact model number? Explain how to reinstall Google Play Services if they disappear after the update? Walk you through using Huawei HiSuite to check for official updates from a computer? AI responses may include mistakes. Learn more
Unless you have experience with custom ROMs and accept major bugs, stay on KitKat (B015 or B017 stock firmware) – it is stable and fully functional.
If you still want to try Lollipop, search XDA Developers forum for:
“Huawei MediaPad X1 Android 5.0 custom ROM” – look for threads by surdu_petru or mparus.
Would you like a link to the last known working TWRP and Lollipop ROM for this device?
To update your Huawei MediaPad X1 7.0 to Android 5.0 or 5.1.1 Lollipop, you can use either an official online update or a manual SD card installation if the online method is unavailable. Be aware that official support for this device ended some years ago, and many models originally peaked at Android 4.4.2 KitKat. Option 1: Official Online Update (OTA)
This is the safest method to check for official Lollipop firmware directly from Huawei's servers.
Preparation: Back up your data and ensure your tablet has at least 30% battery and a stable Wi-Fi connection.
Navigate to Updates: Go to Settings > System & updates (or About tablet on older versions).
Check for Software: Tap Software update or System Update, then select Check for updates or Online update. This process assumes you have basic command-line knowledge
Install: If a version for Android 5.x is found, tap Download and install. The device will automatically restart once the process is complete. Option 2: Manual SD Card Update (Local Update)
If the OTA update does not appear, you may need to manually flash the firmware using an SD card. This method is common for transitioning between regional versions (e.g., Chinese to Global) or force-updating to Lollipop. Huawei MediaPad X1 4.4.2 KitKat update (HOWTO)
The Huawei MediaPad X1 (7.0) is a legacy device originally released with Android 4.2 Jelly Bean. Updating it to Android 5.1.1 Lollipop (EMUI 3.1) is possible, but it typically requires a manual "local update" process as official Over-The-Air (OTA) support for this version was largely limited to specific regional models like the 7D-501L and 7D-503L. Update Preparation
Check Model: Verify your model (e.g., 7D-501u, 7D-501L, or 7D-503L) on the box or under Settings > About Tablet.
Back Up Data: All data will likely be wiped. Use the Huawei Backup app or manual PC transfer.
Charge Battery: Ensure at least 30% battery (ideally 50%+) to prevent power failure during flashing.
SD Card: A blank microSD card with at least 2GB of free space is required. Method 1: Manual Local Update (Recommended)
This is the most common way to install official firmware packages found on HUAWEI Support Global or specialized archives like HardReset.info.
Download Firmware: Locate the Lollipop (Android 5.1.1 / EMUI 3.1) firmware zip for your specific model.
Extract Files: Unzip the package on a PC and find the folder named dload, which contains the UPDATE.APP file.
Transfer to SD: Copy the entire dload folder to the root directory of your microSD card. Initiate Update:
Software Method: Go to Settings > Updater > Menu > Local Update.
Force Update (If tablet is off): Insert the SD card, then press and hold Volume Up + Volume Down + Power simultaneously until the update screen appears. Method 2: HiSuite (Official PC Tool) Note: Bootloader will remain unlocked, but you can
Huawei HiSuite can sometimes find newer versions that don't show up via OTA. Connect your tablet to a PC via USB. Open HiSuite and click Update.
If a Lollipop version is found, follow the on-screen prompts to download and install. Method 3: Custom ROMs (Advanced)
If official firmware is unavailable, advanced users often turn to custom ROMs like CyanogenMod (CM) for Android 5.1.1 or higher.
Requirements: Requires an unlocked bootloader and a custom recovery like TWRP or CWM.
Process: Boot into recovery mode, wipe data/cache, and install the CM zip file followed by the Google Apps (GApps) package.
Note on Performance: Some users suggest staying on Android 4.4.2 KitKat, as older hardware may experience performance lag on the heavier Lollipop/EMUI 3.1 interface.
Gather the following before you begin. Missing any item can brick your device.
Q: Will I lose 4G/LTE functionality after the update?
A: Not if you flash the correct ROM for your model (7D-503L for LTE, 7D-501u for Wi-Fi). Always check the ROM’s description.
Q: Can I downgrade back to KitKat?
A: Yes. Download the official Huawei stock firmware (update.app) and flash via dload method using a microSD card.
Q: Is there an Android 7.0 (Nougat) ROM?
A: No. The Kirin 910 chipset lacks proper driver support for Nougat. Lollipop is the final functional Android version for this tablet.
Q: My tablet is stuck in a boot loop. Help!
A: Boot back into TWRP (Power + Volume Up). Perform a factory reset and re-flash the ROM. If that fails, restore your TWRP backup (you did make one, right?).
No custom ROM is perfect. Here are known bugs with CM12.1 on MediaPad X1 and how to fix them:
| Issue | Workaround/Fix | |-------|----------------| | Screen rotation lag | Disable “Auto-rotate” and use an app like “Rotation Control”. | | Video recording crashes | Use a third-party camera app (e.g., Open Camera) set to 720p. | | Battery percentage not accurate | Calibrate battery: Drain to 0%, charge to 100% while off. | | No deep sleep | Install “Greenify” and hibernate background apps. | | Mobile data disconnects | Set APN manually. Go to Settings → Mobile networks → Access Point Names → Reset to default. |
What works perfectly: Calls, SMS, 4G/3G, WiFi, Bluetooth, GPS, MTP file transfer, YouTube, Netflix (Lollipop compatible versions).