Solution: Enter BIOS (F10), change SATA mode from RAID/AHCI back to IDE (or vice versa depending on original setting). If still failing, boot from Windows installation USB and run Startup Repair.
Cause: BIOS write-protect jumper (J9C1) is enabled.
Solution: hp compaq dc5800 small form factor bios update verified
Cause: HP’s Secure Flash prevents downgrading or unsigned mods.
Solution: You must be updating from v01.22 or later. If you have v01.04 or lower, you must install v01.22 first as an intermediate step. Solution: Enter BIOS (F10), change SATA mode from
A: Do NOT reboot. Leave the system on. Use a second computer to prepare a DOS USB with the same BIN file, insert it, and run the flash again from the hanging command line (if responsive). If completely frozen, you need an external EEPROM programmer (e.g., CH341A). Cause: BIOS write-protect jumper (J9C1) is enabled
The last official BIOS release for the DC5800 series is Version 786F1 v01.28 (or later revisions like v01.29 depending on region). Do not trust anything claiming to be v02.xx—those are for newer HP models.
A: No. The asset tag is stored in a separate NVRAM sector. However, take note of it before updating.
Vetted Community Repositories