Hitachi Pc-kca110 Driver Info

If you have installed the software but the board is not responding:

Note: Hitachi has largely exited the projector and whiteboard hardware market in recent years. If the official links are down, you may need to contact their dedicated support line for legacy products.

Troubleshooting Your Hitachi PC-KCA110 Finger Vein Scanner 

The Hitachi PC-KCA110 (also known as the H-1) is a specialized biometric security device that uses finger vein patterns for highly accurate authentication. If you are looking for the right driver or trying to get a legacy unit working on a modern system, here is what you need to know.  Finding the Right Driver 

Because this is an older enterprise-grade device, official driver support can be difficult to locate on Hitachi’s main consumer portals. 

Legacy Systems: Original drivers were designed for Windows XP, 2000, and Server 2003. hitachi pc-kca110 driver

Modern Workarounds: For newer versions of Windows, some users have had success using third-party driver repositories or scanners like the Hitachi Finger Vein Reader Drivers on Driver Scape.

Verification: Ensure you are looking for drivers matching the hardware ID: USB\VID_04A4&PID_005B.  Common Setup Issues 

If your device is plugged in but not responding, check the following: 

Physical Connection: Always use the supplied USB cable to ensure it meets FCC emission limits and provides adequate power.

LED Status: If the LED light remains off or doesn't turn green, it often indicates a driver failure or a dirty sensor surface. If you have installed the software but the

Software Compatibility: The PC-KCA110 is often used with specific middleware for "Logical Access Control." Without the companion authentication software, the driver alone may not allow you to log into Windows.  Why Finger Vein? 

Unlike standard fingerprint scanners, the PC-KCA110 uses light transmission to capture the vascular pattern inside your finger. This provides: 

High Accuracy: A False Acceptance Rate (FAR) of approximately 0.0001%.

Anti-Spoofing: Because it requires blood flow/internal patterns, it is much harder to "fake" than a surface fingerprint. 

For more technical specifications and enterprise support, you can visit the Hitachi Global VeinID page.  Note: Hitachi has largely exited the projector and

Open Hitachi PC-LESS Setting Tool or AirNEXT Utility.

If the software connects, you are done.

This is the most common point of confusion. If you connect a Hitachi PC-KCA110 to your computer via USB and see an “unknown device” error in Windows Device Manager, you do need a driver. However, in many modern configurations, the PC-KCA110 connects via an Ethernet cable (RJ45). In that case, you do not need a specific USB driver—you need the correct IP address and configuration software.

Search for “Hitachi PC-KCA110 Installation Manual” (PDF). Avoid generic document sites; use Hitachi’s official hitachiaircon.com domain. The manual includes wiring diagrams, DIP switch settings, and default IP addresses (e.g., 192.168.1.100).

The model number KCA110 is typically associated with the Hitachi Starboard line of interactive whiteboards. Hitachi does not usually provide a standalone "driver" file for these; instead, they require the installation of the Starboard Software suite, which includes the necessary drivers.