![MPTools Interface Description]
Do not guess the controller model. You must verify that your USB drive actually uses a FirstChip controller.
Manual driver install (if auto fails):
This is the most difficult part. When you open the software, it may look overwhelming.
Upon first launch, Windows may throw a warning: “Windows protected your PC” (SmartScreen). This is common for unsigned driver-based tools. You must click “More info” then “Run anyway”.
The tool will then attempt to install its own driver (usually a modified USB mass storage driver). You’ll see a command prompt window flash – this is normal. After that, you must restart your PC or at least reconnect your USB drive. firstchip fc1178 fc1179 mptools v1052 install
Important: Disable driver signature enforcement on Windows 10/11 (Shift + Restart → Advanced startup → Disable driver signature enforcement), or the driver installation may fail silently.
Using FirstChip MPTools v1052 carries a risk of data loss. Always attempt to back up data before flashing. If the drive is physically damaged (controller failure), software tools cannot fix it. This guide is for educational purposes; use official manufacturer tools when available.
FirstChip MPTools v1.0.5.2 is a specialized mass production (MP) tool used primarily to repair corrupted USB flash drives, restore factory capacity, or fix "No Media" errors on drives using FirstChip FC1178 controllers. 1. Preparation Before starting, ensure you have the following: Identify Your Controller : Use a tool like ChipGenius to confirm your USB uses the controller. System Environment
: Use a Windows PC (Windows 10/11 is generally compatible). It is recommended to use a rear USB 2.0 port for a stable power supply.
: Disable antivirus software temporarily, as these tools are often unsigned and may trigger false positives. 2. Download and "Install" FirstChip MPTools is a portable application and does not require a traditional installation process. Obtain the Software Do not guess the controller model
: You can find legitimate versions on specialized sites like
: Unzip the downloaded archive into a folder on your local drive (avoid running it directly from the USB you are trying to fix). 3. Basic Configuration FirstChip_MpTools.exe (or similar executable in the folder) as an Administrator Interface Language
: If the tool opens in Chinese, look for a language dropdown in the top-right corner to switch to Detect Drive
: Insert your USB drive. It should appear in one of the tool's numbered slots. : Click the button (default password is often blank,
: Initially select "Standard Scan." If that fails, some users recommend a "Factory Scan" for deep repairs. Flash ID: Ensure the tool recognizes the Flash
: Ensure the Flash ID matches what was reported by ChipGenius. 4. Execution and Repair : Click the
button on the main screen to begin the low-level formatting and firmware reflashing process. : The tool will cycle through stages: Download FW → Erase → Program → Verify → Format Completion : Wait for the status to turn Green (PASS) . If it turns Red (FAIL)
, check the error code (e.g., Code 31/33 often indicates an unsupported Flash ID). 5. Post-Repair
Once finished, safely remove the drive and re-insert it. Windows should detect it as a new "USB Mass Storage Device" with its original factory capacity restored. specific error code you encountered during the scanning process? FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
After installation, your drive should disappear from “My Computer” (this is normal). In Device Manager, it should now appear under Universal Serial Bus devices as FirstChip (FC1178/FC1179) USB Device.
If you see this, the driver is working. If not, repeat Step 1 and reinstall.