Ezviz Downgrade Firmware Free May 2026

Final path should look like:
SD_CARD/ezviz/update/digicap.dav

After downgrade completes:

If you get stuck, post your exact model and current firmware version in an EZVIZ forum — the community usually has archived files and step‑by‑step help.

Summary:
✅ Find old firmware
✅ FAT32 SD card with ezviz/update/digicap.dav
✅ Insert & reboot
✅ Factory reset
✅ Block future updates

Free, DIY, and effective — if your hardware allows it.

Downgrading firmware on cameras is often sought by users trying to regain features like RTSP support or compatibility with older

NVRs. While EZVIZ officially states that firmware downgrades are not supported for security reasons, it is possible to do so for free using specific software tools. Essential Tools To perform a manual downgrade, you will need the following: EZVIZ Studio (Windows PC):

This desktop application allows for more "Advanced" configuration than the mobile app. Firmware File (.dav):

You must source the older firmware version specific to your camera model (e.g.,

). These are often shared in community forums or can sometimes be found via direct download links from EZVIZ's servers if you know the exact model path. Step-by-Step Downgrade Process Downgrading an EZViz CS-CV216-A0-31EFR IP Camera -

You're looking for a guide on downgrading the firmware of your EZVIZ device to a previous version, and you're interested in free solutions. I'll provide you with a helpful guide, but please note that downgrading firmware can have potential risks and limitations.

Disclaimer: Downgrading firmware may void your device's warranty, and there's a risk of bricking the device if not done properly. Proceed with caution and at your own risk.

What is EZVIZ? EZVIZ is a popular brand that offers a range of smart home security cameras, doorbells, and other IoT devices. Their devices are known for their high-quality video, motion detection, and user-friendly interfaces. ezviz downgrade firmware free

Why Downgrade EZVIZ Firmware? There are a few reasons why you might want to downgrade your EZVIZ device's firmware:

Free EZVIZ Firmware Downgrade Methods: Here are a few methods to downgrade your EZVIZ device's firmware for free:

Method 1: Using the EZVIZ App

Method 2: Using the EZVIZ Website

Method 3: Using a Third-Party Website (Not Recommended) Some third-party websites may host older firmware versions for EZVIZ devices. However, be cautious when using these websites, as they may not be official or trustworthy. Make sure to research the website and read reviews before proceeding.

Step-by-Step Downgrade Process:

Potential Risks and Limitations:

Conclusion: Downgrading your EZVIZ device's firmware can be a bit tricky, and it's essential to be aware of the potential risks. Before proceeding, ensure you have a good understanding of the process and the potential limitations. If you're not comfortable with the process, it's recommended to stick with the latest firmware version or contact EZVIZ support for assistance.

The quest for an EZVIZ firmware downgrade is a common "tech legend" told by users whose cameras suddenly stopped supporting features like local storage or third-party RTSP streams after an "auto-update."  The Story: The "Glitch" in the Update 

Leo loved his EZVIZ camera. It was reliable, clear, and most importantly, it played nice with his home server. One Tuesday, he tapped "Update" on the EZVIZ App, thinking he was getting better security. 

Instead, he lost his favorite feature. The new firmware had locked the camera into a "Cloud-only" mode, and his local setup went dark.  The Search for the "Golden File" 

Leo searched the forums, looking for a way back. He learned that:  Final path should look like: SD_CARD/ezviz/update/digicap

The Official Stance: Manufacturers like EZVIZ typically don't offer a "Rollback" button in the app. Unlike some enterprise gear that keeps a backup version, consumer cameras often overwrite the old system entirely.

The Manual Method: To downgrade for free, Leo needed a firmware binary file (.dav or .bin) specific to his exact model (like the C6N or TY2). Finding these is the hardest part, as they aren't usually on the EZVIZ Support FAQ.

The SD Card Trick: The "legend" says if you put the old firmware file on a FAT32 microSD card, insert it into the reset slot, and hold the reset button while powering on, the camera might "force-flash" the old version.  The Moral of the Story 

Leo eventually found a firmware file on a community forum, but he hesitated. If the file was corrupted or for the wrong region, his camera would become a "brick"—a plastic paperweight that wouldn't even turn on.  The takeaway for EZVIZ owners: 

Turn off Auto-Update in the settings if your current setup works perfectly.

Contact Support: Sometimes, if an update breaks a specific function, EZVIZ Support can push a "special" version to your device ID remotely.

Check your Verification Code: If you do manage to reset or downgrade, you’ll need that 6-digit code on the sticker to get back online.  Where to find the EZVIZ device verification code - FAQ

Here’s a draft write-up for informational or educational purposes, focusing on the process, risks, and context of downgrading EZVIZ firmware for free. It’s written in a neutral, how-to style suitable for a tech blog or support forum.

Downgrading the wrong firmware will brick your camera (turn it into a useless, blinking paperweight). To avoid this:

While the firmware itself is "free," the process of downgrading is unsupported and risky. EZVIZ intentionally removes older firmware files to protect users from security flaws.

If you proceed, ensure you have the exact correct file for your specific camera model number (found on the sticker on the bottom of the unit). Always assume that once you downgrade, you may not be able to upgrade again, and the device could become permanently unusable.

Downgrading EZVIZ firmware can be a necessary step if a recent update has caused connectivity issues, removed features, or created compatibility problems with your NVR. While the official EZVIZ app generally only supports upgrades, it is possible to revert to an older version using specific tools and firmware files. Understanding the Downgrade Process After downgrade completes: If you get stuck, post

EZVIZ devices are built on Hikvision architecture, which means they often share similar recovery protocols. A downgrade is essentially a manual firmware flash. Unlike a standard "Over-the-Air" (OTA) update, this process requires a direct connection between your computer and the camera to push the older software version. Preparation and Prerequisites

Before attempting a downgrade, you must gather the right tools. Ensure your camera is powered by a stable source; a power failure during a firmware flash can "brick" the device, making it permanently unusable. You will need:

A Windows PC connected to the same local network as the camera.

The specific firmware file (usually a "digicap.dav" file) matching your camera's exact model and hardware version.

The EZVIZ Studio software for PC or the Hikvision SADP Tool to identify the device’s IP address.

An Ethernet cable connection is highly recommended over Wi-Fi for stability. Finding the Correct Firmware

Finding the correct firmware is the most critical step. Installing firmware intended for a different model will cause the device to fail. Look for the model number on the sticker of your camera (e.g., CS-C6N or CS-TY1). You can often find older firmware archives on official EZVIZ support regions (like Europe or North America sites) or reputable CCTV community forums. Always verify that the firmware version you are downloading is older than your current version but still compatible with your hardware revision. Step-by-Step Downgrade via EZVIZ Studio

EZVIZ Studio is the most user-friendly way to manage this. Once installed, follow these steps: Open EZVIZ Studio and log in to your account.

Go to the "Advanced Settings" menu. If you don't see it, you may need to enable it by adding a "AppConfig.ini" file to the software's installation folder. Select your camera from the device list. Navigate to the "Maintenance" or "Upgrade" tab.

Instead of searching for an update, click the "Browse" or "Local Upgrade" button. Select the downloaded firmware file from your computer.

Confirm the action and wait for the progress bar to complete.

The camera will reboot automatically once the process is finished. Do not close the software or unplug the camera during this time. Alternative Method: TFTP Force Flash

If the camera is stuck in a boot loop and cannot be reached by EZVIZ Studio, you may need to use a TFTP (Trivial File Transfer Protocol) server. This tool "forces" the firmware onto the camera during the initial seconds of its boot-up sequence. You place the firmware file in the TFTP root folder, set your PC's IP address to a specific static range (usually 192.0.0.128), and power on the camera. The camera will automatically look for the server and pull the firmware. Final Considerations

After a successful downgrade, it is vital to disable "Auto-Update" in the EZVIZ mobile app settings. If left on, the camera will likely reinstall the problematic newer version overnight. Downgrading is a powerful way to regain control over your hardware, provided you use the correct files and maintain a stable connection throughout the process.