Download Spflash Tool Version 5.2404.00.000 May 2026

Download Spflash Tool Version 5.2404.00.000 May 2026

Danger: This erases your IMEI, NVRAM, and calibration data. Backup NVRAM first using MTK Droid Tools (if possible). Use only if the device is completely dead.

Before proceeding, ensure you have a backup of your data. Flashing firmware will wipe your device if the "Firmware Upgrade" option is selected. Download SPFlash Tool version 5.2404.00.000

Prerequisites:

Steps to Flash:

  • Connect Device: Click the "Download" button in the tool. Power off your Android device completely. Connect the device to the PC via USB cable while holding the Volume Down button (method varies by device).
  • Wait for Completion: The tool should detect the device and begin flashing. A green circle with a checkmark will appear when the process is 100% complete.
  • Reboot: Disconnect the USB and power on your device.

    • Once the tool is open, you will see a multi-tab interface. The most common operation is “Download” (flashing firmware). Danger: This erases your IMEI, NVRAM, and calibration data

    | Issue | Solution | |-------|----------| | ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0xC0050005) | Use a different USB port (2.0 preferred); test updated DA file. | | Tool freezes at “Download DA 100%” | Disable USB selective suspend in Power Plan. | | S_BROM_CMD_STARTCMD_FAIL (0x7D4) | Reinstall VCOM drivers, disable driver signature enforcement (test mode). | | Auth file required (secured boot) | Supply the correct auth_sv5.auth file (vendor-proprietary). | Before proceeding, ensure you have a backup of your data

    Assume you have a valid firmware package containing a scatter.txt file and image files (.img, .bin).