Qumaron uses cookies. By using our services, you're agreeing to our Cookie policy.

Au87101a Ufdisk Full Site

A focused, practical guide to fully erasing, repartitioning, and reinitializing storage on devices using the AU87101A UFDISK utility (commonly used with AU87101A controllers/USB flash devices). Intended for technicians who must perform a complete low-level wipe and recreate partitions/filesystems safely and reproducibly.

Warning: these operations destroy all data irreversibly. Verify device identifiers, backups, and that you have permission to modify the device.


Most industrial systems support SNMP traps or email alerts. Set a warning at 80% and a critical alert at 90% of ufdisk capacity. au87101a ufdisk full

If files are visible but cannot copy, or filesystem is corrupted:

  • Use PhotoRec for file carving when filesystem severely damaged.
  • If automounter (udisks2, gvfs) keeps re-mounting, stop it temporarily or eject the device via GUI while keeping it physically connected.

  • ufdisk is not a standard Linux, Windows, or BSD command. It is almost certainly a proprietary user‑space disk management utility developed for a specific operating environment — possibly: A focused, practical guide to fully erasing, repartitioning,

    The ufdisk utility typically handles partitioning, formatting, and capacity checks on raw NAND/NOR flash, CompactFlash cards, or early SSD modules.

    The AU87101A is a specific storage module (typically a CompactFlash or industrial-grade USB Flash Disk) used in Alcatel-Lucent (Nokia) Service Routers (SR), including the 7450 ESS, 7750 SR, and 7950 XRS series. It serves as the primary bootable storage for the TiMOS operating system, configuration files, and log buffers. Most industrial systems support SNMP traps or email alerts

    When the system reports “UFDISK full” (often displayed via admin show system or file cf1:, file cf3:), it indicates that the active storage partition has exhausted its available blocks. This condition is critical: it can lead to configuration loss, crash dumps failing to write, and, in severe cases, a boot loop or bricked state after a reboot.

    This document outlines the root causes, detection methods, immediate risks, and a step-by-step remediation plan.

    No. It is a storage capacity error, not a malicious threat.

    Prerequisites: Admin access, console or SSH, and a remote file server (FTP, TFTP, SCP) for offloading files.