Atlantis Scan Upload 1.11 (ASU 1.11) is a specialized software application by Dentsply Sirona designed to bridge the gap between dental clinicians or labs and the Atlantis manufacturing facility. It streamlines the process of uploading intraoral or model scans for the creation of custom Atlantis abutments and suprastructures. Core Functionality of Version 1.11
The primary role of ASU 1.11 is to facilitate the digital transmission of high-resolution STL files to Atlantis WebOrder. This version includes essential features for:
Scan Body Detection: The software automatically detects and reviews Atlantis FLO (Feature Locating Object) and IO FLO scan bodies, ensuring the implant's position and orientation are accurately captured.
Workflow Validation: It serves as the validated pathway for digital impressions, particularly those taken with Primescan, to be sent for manufacturing.
Order Management: Users can create new abutment or suprastructure cases, enter patient info, and select specific tooth numbers directly within the interface. Installation and Setup To install Atlantis Scan Upload 1.11, users must: Atlantis® Scan Upload
The clinic was silent, save for the rhythmic hum of the air filtration system. Dr. Aris leaned back, his eyes fixed on the dual monitors. On the left, a vibrant, three-dimensional landscape of a patient’s jaw glowed in neon blues and pinks—a "digital map" captured by the intraoral scanner. On the right, the interface for the Atlantis Scan Upload waited for its payload.
"Version 1.11," Aris muttered, checking the software footer. He liked this version; it was stable, fast, and the automatic file validation meant he wouldn't get a "Rescan Requested" notification three days later when the patient was already halfway across the country.
He dragged the high-resolution STL files—upper arch, lower arch, and the gingiva mask—into the upload zone. As the progress bar began its slow crawl, Aris thought about how much had changed. Ten years ago, he’d be dealing with messy silicone impressions, stone models that could chip in the mail, and the literal "wait and pray" of physical shipping.
Now, his patient’s anatomy was being converted into encrypted data packets. Somewhere across the world, a technician would open these exact files, using the Atlantis WebOrder portal to design a patient-specific abutment that would fit with sub-millimetre precision. A soft ping echoed in the office. Status: SCANNED.
Aris smiled. The data had cleared the gate. In a few minutes, the status would flip to IN PROCESS, and the physical manufacturing of a new smile would begin. He closed the lid of his laptop, the blue light fading from his face, and walked out into the evening, leaving the digital bridge to Atlantis to do its work. Atlantis® Scan Upload
This guide outlines the process for installing and using Atlantis Scan Upload 1.11, the software used to transmit digital dental impressions to Dentsply Sirona for abutment fabrication. 1. Installation and Setup
To begin, you must download the installer from your Atlantis WebOrder account.
Download: Log into Atlantis WebOrder, navigate to the Help section on the far right, and select Atlantis scanning.
Install: Locate the file ASU_1.11.X.X.exe. Double-click to run it; if prompted, select Run as Administrator. Follow the installation wizard prompts until complete. Configure: Open the application and go to Settings.
Enter your Atlantis WebOrder login credentials and test the connection.
Select your preferred Language (e.g., English) and Tooth Numbering System (e.g., FDI).
Restart the application for language changes to take effect. 2. Preparing Your Scan Files
Before uploading, ensure your scans are properly exported from your scanner software.
File Format: Export cases as high-resolution separate STL files (not archived/zipped).
Required Scans: You will typically need the upper jaw, lower jaw, and a gingiva mask. Scan Bodies: For lab-based scanning, select Lab FLO. For intraoral scanning, select IO FLO.
Note: 3Shape Scan Bodies cannot be used with the Scan Upload tool; they require a direct workflow. 3. Uploading a New Case
Once your files are ready, follow these steps in the Atlantis Scan Upload application: atlantis scan upload 1.11
Create Order: Click New Abutment + and enter an order reference.
Select Equipment: Choose the scanner type used for the case.
Enter Details: Provide patient information and select the appropriate Atlantis lab flow.
Assign Teeth: Select the arch and specific tooth positions for the implants.
Add Scans: Attach the corresponding STL files for each required catalog (e.g., pre-op, arch scans).
Submit: Click Send or Submit. This will link you to the digital prescription in Atlantis WebOrder. 4. Understanding Order Status
After submission, you can track your case status within the software:
PARTIAL: Exported from the app but not yet submitted in WebOrder.
SCANNED: Successfully submitted; will change to "In Process" shortly.
HOLD for design approval: Requires you to review and approve the design in WebOrder before manufacturing.
RESCAN REQUESTED: The scan was insufficient; a new scan is required for production. Atlantis® Scan Upload
Atlantis Scan Upload 1.11 is a stand-alone software application from Dentsply Sirona
designed to streamline the transfer of digital scan files from open STL scanners to the Atlantis WebOrder
platform. It is a critical component for dental laboratories that do not use a direct-integrated workflow, allowing them to submit cases for patient-specific Atlantis abutments and suprastructures. Dentsply Sirona Core Functionality Workflow Integration:
The software acts as a bridge, allowing labs to export scan files from systems like 3Shape, Exocad, or Dental Wings and import them into the Atlantis ecosystem. File Handling:
It supports drag-and-drop and bulk uploads of common scan file formats, including STL files. Case Management:
The tool provides a case-based organization system, real-time progress tracking, and automatic file validation to ensure scans meet technical requirements before submission. Version 1.11 Highlights Installation:
Version 1.11 (often specifically referred to as ASU_1.11.X.X) is downloaded directly from the Atlantis WebOrder help section System Requirements:
It is designed to work alongside Connect Case Center Inbox version 1.1.7 or higher. Feature Updates:
This version includes the "What's New?" feature—a PDF document accessible within the software that lists the latest enhancements and feature additions. Configuration:
Users can customize settings for language and preferred tooth numbering systems within the version 1.11 interface. orderdigitalsolutions.com Standard Upload Process Atlantis® Scan Upload Atlantis Scan Upload 1
Atlantis Scan Upload 1.11 is a specialized companion software tool from Dentsply Sirona
designed to securely and efficiently transfer dental scan files to the Atlantis WebOrder
platform. It acts as a critical link in the digital dentistry workflow, enabling the fabrication of custom patient-specific solutions like Atlantis abutments and suprastructures. Overview of Version 1.11
As a "lightweight" application, version 1.11 focuses on streamlining the submission process for dental labs and clinics. It serves as a requirement for laboratories using advanced scanning systems, such as the Connect Case Center Inbox 1.1.7 or higher. Key Features and Capabilities Workflow Efficiency : The tool supports drag-and-drop bulk uploads
, significantly reducing the manual effort required to move data from local scanners to the Atlantis design interface. Data Integrity : It includes automatic file validation
to ensure that scans meet the high-resolution requirements (typically STL format) before submission. Resumable Transfers
: For large datasets, the software allows for resumable uploads, ensuring that temporary network interruptions do not require a complete restart of the transfer. Security and Governance
: Transfers are fully encrypted, and the software supports optional user permissions and audit logs to comply with strict data governance standards. Installation and Technical Configuration
To access version 1.11, users typically navigate to the "Help" section of their Atlantis WebOrder
: Select the file labeled “ASU_1.11.X.X” from the Atlantis scanning help page. Authentication
: After installation, users must enter their Atlantis WebOrder credentials to establish a secure connection. Preferences : The interface allows for customization of the tooth numbering system (e.g., FDI system) and the specific scanner being used. Strategic Importance in Digital Dentistry
Atlantis Scan Upload 1.11 is more than a simple file transfer utility; it is the gateway to Atlantis VAD (Virtual Abutment Design)
. By facilitating the upload of high-precision digital files—including soft tissue data, adjacent teeth, and opposing dentition—it enables the digital design of restorations even before the physical components are manufactured.
However, users should note that certain workflows, such as those using 3Shape Scan Bodies
, must be sent via a direct validated workflow and cannot be exported as STL files for use with the Scan Upload tool. step-by-step guide on how to configure a specific scanner with version 1.11? Atlantis® Scan Upload
Atlantis Scan Upload 1.11 is a dental laboratory software version from Dentsply Sirona used to securely transfer digital scan files to the Atlantis WebOrder platform for the design and manufacture of patient-specific abutments and suprastructures. Core Functionality
The software acts as a bridge between intraoral or laboratory scanners and the Atlantis production workflow:
Workflow Integration: Clinicians use tools like Primescan to capture digital impressions, which are then sent to a lab or directly uploaded via Atlantis Scan Upload.
Case Management: It supports bulk uploads and uses a case-based organization to track real-time progress of orders.
File Validation: The tool automatically checks scan files for compatibility and provides actionable error messages if surfaces are missing or alignment is incorrect. Installation and Setup (v1.11) To deploy version 1.11, users typically follow these steps:
Download: Accessible through the "Help" section of Atlantis WebOrder by selecting the specific ASU_1.11.X.X file. Or pull the latest Docker image: docker pull
Configuration: After installation, users must configure settings such as language, the preferred tooth numbering system (e.g., FDI), and their specific scanner model.
Authentication: Connection is verified using the user's Atlantis WebOrder credentials, which must be activated by a Dentsply Sirona representative. Technical Requirements
Scanner Compatibility: Validated for use with various scanners, including Primescan and Omnicam, provided they use compatible scan bodies like the Atlantis IO FLO-S.
Software Dependencies: Version 1.11 or higher is often required to work in tandem with other laboratory tools like Connect Case Center Inbox.
The official paper providing instructions for Atlantis Scan Upload version 1.11 is the Atlantis Scan Upload User Guide. This document outlines the technical requirements, installation steps, and workflow for submitting digital dental scans to the Atlantis platform. Key Version 1.11 Information
Installation File: The specific installer mentioned for this version is named ASU_1.11.X.X.exe.
System Requirements: The software is a "lightweight companion tool" designed to streamline the submission of 2D and 3D scan files.
Core Functionality: It enables drag-and-drop and bulk uploads of STL files, automatic file validation, and resumable transfers for large datasets. Installation and Setup Steps
Download: Log on to Atlantis WebOrder, navigate to the scanning section in the help pages, and download the ASU_1.11.X.X file.
Run as Administrator: Right-click the installation file and select "Run as Administrator" to ensure all permissions are granted during setup. Initial Configuration:
Open the "Settings" section to select your preferred Language and Tooth Numbering System.
Set the Internet Connection to "Default" or your specific configuration. Workflow for Uploading Scans
Adding Files: Users can click the "Add Scan" box to browse their computer or simply drag and drop files into the "Uncategorized" area of the window.
Organization: Once files are in the uncategorized area, they must be dragged into the correct specific boxes (e.g., upper arch, lower arch, or scan body) for the order.
Order Status Tracking: After clicking "Submit," the order status will briefly change to SCANNED before moving to IN PROCESS. If more information is needed, the status may change to RESCAN REQUESTED.
For further assistance, you can view the official Dentsply Sirona Atlantis Scan Uploader tutorial. Atlantis® Scan Upload
Upload files directly to S3 or Azure Blob with signed URLs. Atlantis processes them in-place, reducing memory overhead and speeding up large scans.
Officially, Atlantis Scan Upload 1.11 denotes a batch of high-resolution sonar and magnetometer data uploaded to a restricted-access scientific server on January 11th (1/11) of an unspecified recent year. The “Atlantis” codename is not a reference to the mythical sunken city, but rather the project’s internal designation: ATLANTIS stood for Acoustic Transects and Lithospheric Analysis of North Tectonic Inversion Structures.
The scan was conducted by a joint marine geology team from the University of Lisbon and the Woods Hole Oceanographic Institution. Its original purpose was to map unusual magnetic anomalies along the Ampere Seamount—a submerged volcanic mountain west of the Strait of Gibraltar.
The version number "1.11" has sparked its own sub-mystery. Beyond the potential date-stamp theory (1st November), occult-minded researchers have pointed to several coincidences:
Upgrade via the Atlantis CLI:
atlantis upgrade --version 1.11
Or pull the latest Docker image:
docker pull atlantis/scan-upload:1.11